Search results

Hi there Would anyone have a super bright full of colours cool looking high resolution picture I can use to do some testing?? I did do the test paterns that roland has I just like a nice picture with bright colors Thanks Biggs

Hello there Might be a dumb question but i am looking on getting a used efi i1 Pro ES 2000 spectrophotometer I just want to make 100% sure it will work with Versaworks 5 I might be blind but I don't see it listed in the measurement instrument list Thanks Biggs

Hi there everyone i am trying to do a few test prints of 4 squares C M Y K and its pretty clear that is not 100% Yellow and the other colors are not 100% also I export my file from corel as a eps and use the default settings, open in versaworks and print I sure i am doing something wrong or...

Hello everyone I am just curious to see, i searched and could not find a answer At the beginning of each run ( i use CustonCut ) it waist about 3 inch of media I move the media back with the keys on the control pane to set base point then it stops it seams to me it has a set distance for that...

Hi Everyone I have a VP-540 that was working fine and one day decided not to turn on, I checked all the fuses and they are fine, power supply is punting out 40V the led on all other board are on but no the ones on the servo board. I checked the voltage on the L4960 Voltage regulator, input is...

Hello All Anyone know if there is a way to calibrate or align the machine for when it comes for the next color ?? It looks like my machine is off by about 0.025" and it looks like it shifts about 0.025" for every color The more spot colors you have the more it gets shifted to the left Any...

Hi There I am having a problem importing a EPS file from corel with a drop shadow in it I keep getting lines n my drop shadow like in the screen shot Anyone have any ideas ??

I am tying to import greyscale into omega 5.0 I use Corel Draw x8 and I tried export my design EPS, PDF in greyscale when i import my file into corel draw it opens as greyscale and when i import it in Omega 5 so i can print it, it open as CMYK I would like to print it in greyscale Any one...

Hello Everyone I have a Designjet 815MFP i am trying to get working and the Lamp is not coming on at all I also sometimes get Error 33 stitching failed, I am guessing that is because the lamp is not working I tested the Lamp and it works, I Have the service manual and it says to replace the...

Hello Everyone I need some help looking for All the adjustment patterns for my Designjet 815 MFP The software gave me these part numbers 1) Optical Adjustment Pattern Q1278-60013 2) Focus Adjustment Pattern Q1278-60012 3) sheet for the Scanner Q1278-60012 I know 2) 3) are the same part...

Hello All I am trying to do a fade or gradient along a curved lined, like the letter S in the picture I am playing with the Blend option, Is that a good approach ??? I am using Corel Draw X8 Thanks in advance

Any one know how to get the head rank from a head that has no label on it ??? i have a few heads and the decals got washed off :(( Thanks

Hello everyone Here i have a VP-540 with all kinds of problems, First Problem it was not printing anything so i took it apart flush all the line and the heads got ink flowing and still nothing at all, With a bit of reading and thanks to the people on this forum, i find out that F1 and F2 fuses...

Hello everyone I am looking for someone that can save me or have some edge fx plugs they would like to get rid of ??? Some people call them caps Thanks in advance Biggs

Anyone know were i can get charcoal gray for the edge fx ?? or if i can make it someone with the spectraton colors ??? Thanks Biggs

Anyone know how to make or get charcoal gray for the edge fx ?? They have almost every color but that one :( Thanks Biggs

Hello every one I am looking to see if anyone can help me out i use Corel Draw x5 and i am looking for the best way to export into Omega 4 I tryed a few with mix resaults so far the best is eps :thankyou: Bigs

Hello all can anyone help me out i am having a Hard time with gradients I have a sqare that shades from cobalt blue to intence blue i make sure it is all spot colors but for some reson it always waht to print in 4 colour prosece i am trying to print on a gerber edge Thanks

Hello All I am having a hard time with my Gerber edge for example. Say i print a blue sqare with a red boarder the edge will print the blue and come back for the red and when it print the red i will have a white line on one side or 2 sides of the sqare between the blue and the red. I tryed...

Hello every one I am having a hard time to export my graphic to flexisign from corel draw. i try all kinds of way and noting seem to work Any one have any sugestions ?? Thanks