Search results

Your problem sounds like your orange is demixed. Orange is almost as bad as white, in terms of demixing.(if you don't shake the cartridges regularily, this will happen) There are alternative media libraries not using orange, but you need to activate them first, because they are hidden by default.

It's sort of masochism to run a old hardware with win/Intel drivers on a new fangled Arm Hardware on a Mac. We simply don't support it. If a customer has the time and nerve to try it, so be it. Just don't call me... My two cents to be constructive (after my rant), if possible try to use the...

Problem here is the type of printer. Since these are UV prints, they need to be cured and therefore need additional passes with the lamp. Ecosolvent Rolands would skip the white spaces.

Could be, that onyx only sends straight lines. I've seen other cutting software do this. This is not a big issue, when the vectors are sent to a cutter directly.

I have sold/serviced all major brands and never liked the complicated user interface of Graphtec. They cut nice, but the Summa (T) cuts superior and faster. I'd go for Summa.

HP has a automatic drop detector for defect nozzle replacement. Vanguard doesn't even have a manual way to do that. As long as there are no missing nozzles, it prints nice. But with degrading heads you will get banding. HP has a unique way of handling white with not much user intervention, where...

Sounds like the mainboard (formatter) needs to be replaced. There have been some small quirks in the early firmware versions, but not what you describe. Squeeking of the rewinder unwinder mechanics can be solved with a bit of grease most of the time.

Install the latest driver'

There are different things, that can happen. The 315 doesn't have a spectro, so it measures the density with the line sensor. This is not very precise per se. The line sensor needs to be clean, otherwise it measures only bullsh... (the spectro sensor is closed/covered during printing, the line...

I'm pretty sure, you spilled ink over the feed encoder disk/sensor. (It's in that area in this printer) This needs to be cleaned/replaced.

I would not try it. What I can say for sure is, the printer will do a cleaning after every 30 carriage scans. (Not if you run it in service mode...) But, you don't know the chemical compatibility of the two inks. It could clog your heads instantly and permanently. To avoid this you would need to...

could be wrongly connected flat cables or bad head. (The bow in the magenta shouts: bad head)

BN2-20

Strange, that it only started now. I had a case with a non-plus cutter, Flexi and Ethernet connection. (Didn't cut to the end.) With USB, it doesn't happen. Maybe some Windows update.

I'm pretty sure your "dust" is ink mist. Thats why you can't remove it. Try a MDF to spread the vacuum.

It should be solved with the latest FW. Roland uses new chips on the ink, that aren't recognized by old FW. Or run it in service mode.(then you need to switch on the heating)

Since this printer is only CMYK, the head adjustment needs to be spot on. Can be tricky on these machines...

I also have it in one unit. Just live with it...

Looks like their "complete rebuild" consists of cleaning the board and replacing the elcos. Maybe a reflow on top. The reflow cold help in this case, but there is no guarantee... I wonder how they test it, except they have a printer... But if it works, it's worth the money...

Head lock is cm5 and goes through IC6 (74LVC541) and finally trough latches into IC30A.