Search results

The heads will not print a wavy pattern like that of the ValueJet. The advancements to the head are mainly for Roland internal use and firmware changes. I have 2 on order and they are backordered for the time being.

Maybe this would shed a bit of light on it... if not, still good to know. http://www.rolanddga.com/rnet30/files/support/a0217e9d.pdf

What version of Flexi are you using ? I have seen all kinds of issues when the Lens Effect is used with design but have not run across a fill not printing... Is the fill visible in the RIP/Print screen?

If the original file is able to be opened and parsed by Flexi, the file should be fine. Seems to be the process of RIP'ing the file that is causing the issue here. By the way, what version of Flexi and OS ? Any issues ripping/printing other files?

Export the Flexi file as EPS and then import into new file... then send to RIP.

The higher heat settings were introduced for the Eco-Sol inkset. The newer Eco-Sol MAX inkset requires less heat to set.

Flexi will struggle opening a file of that size... Try opening it from the Production Manager rather than importing into Flexi and then sending to PM. Agree with other suggestions...

Printed on LG Chem 13 ounce Gloss banner with the Roland XC-540 - Max Ink

Very well could be a "coned" pinch roller wheel as well.... Very common with rubber coated wheels, such as the Roland's. Summa's tend to be a hard plastic and do not wear that bad but it is possible. Check to see if the tracking problem can be reproduced with a scrap sheet of vinyl about 3...

A bit of hardware information may be helpful as well... Processor, Video Card, Memory, etc... You may also try to uncheck the 'Smooth Screen Disply' option in the General tabs within Preferences. Correct me if I am wrong Matthew but I have seen a lot of sluggish systems when this option is...

Happens to all of us sometimes... glad it is fixed

How did you find Signs101.com ? Was it recommended to you or did google point you in the right direction? Welcome.

In the Queue Settings, click on File Format on the left and set the Margin or border to 0.25. Save the settings and you are done.

Use the machine as hard as you can, get the extended warranty and when you are ready to fork out the cash for a bigger model, weigh your options and either sell 300 for 5 or 6k with a warranty and put that towards the bigger model. Dealers are now cutting prices on the 300v and 540v as a...

If you are using EPS files, you need to set the EPS Margin

There is a section in the Help Contents from the Help menu that may shed a bit of light on it for you... Once open, use the search option to locate, "named color settings"

Flexi will not fully function in Vista... SAi has not officially released information on Vista compatibility but on their forums, they have stated that the majority of the incompatibility is on the third party drivers that allow Flexi to operate, not the program itself. Seeing as the...

I have also seen the cartridges bend or bow out that prohibits the tab from extending out far enough to trip the sensors... I am speaking of Roland machines... Have no experience with Mimaki and limited use on Mutoh's

If you have the time, you could weigh an empty cart and new cart and record the numbers... then power off the machine and unplug. Remove carts and weigh again... should be able to get a ratio of what is left based off of these 3 numbers. Plug back in and power back on... Should not reset...

Rolands are the same and I have seen many occasion where the 440ml carts may not trigger the ink empty at all due to the bag of ink in the cart seperating from the side of the cartridge... Hopefully new versions of the printers (all manuf.'s) will go to an Integrated Chip system or possibly...