Search results

I'm trying to get a grasp on what you are saying is wrong, but it sounds like it may be a printhead issue, try to switch printheads with new ones. this is the low hanging fruit. if the heads are still in warranty you can get them replaced for free. if that doesn't work - it will likely be...

Shermin Williams sells Minwax Polycrylic Protective Finish that can be applied to the low VOC paints to make it stickable.

We tried to do an event standing towers for a local event. I've seen these towers in other events and ordered edging from Outwater Plastics that DID NOT WORK. it was a disaster. but fortunately we managed to tape them together and make it work. but it wasn't as pretty as i want - nor is it...

I'm curious as to the table you are using for the welder. We just bought one and have attached it to the sewing table temporarily until we build one. We were thinking of a 10'x3' with a glass top or laminate top to help slide. The glas wpuld be good also for someof pur fabric hot knife...

There are several different flavors (for lack of a better term) in different perf material. There are some with 1mm holes and others with a 1.5mm holes. It is important that the ratio 50/50 hole to solid is used for vehicles for max visibility the size of the holes can make it easier or harder...

I will have an ongoing job coming up where i need to flatbed print on a 4x8 ACS (3mm Dibond) and cut out 8 24x24 pieces (nominal size could be 23.5 x 23.5 or such). While we do have a flat bed route not sure this is the most effective method of cutting down these panels. I was looking into...

Hey Soundhound, I work at Nobleprinters.com and we print and route acrylic every day. 3mm and 6mm. We have a EFI GS3250LXi Pro and a Zund, so we can print and cut to shape/size. Give us a call or see our website for pricing.

Ok, we have a retail client who is looking for a one way window film and doesn't like Perf. so i was wondering about using a mirror tint and UV printing on it for the graphics? We have white ink on a UV Printer so does anyone have experience on printing on tint? Thanks Kalvix

what do you mean by 10 HP gain over original MFI? as a sometimes gamer i'd expect Hit Points, but not in this context. Thanks,qmr55

So we are looking into converting over to a EFI Superflexible ink on the 3250 for vehicle wraps and wondering if any installers have experience with installing this and how it compares to Latex prints. We are 3M Certified and run mostly 180 with 8515, but can't remember installing any prints...

Actually what i told our sales guy was to ask for the copy of the Registration, Driver License, and both sides of the credit card. I would be happy to get the car in our shop and installed. and then place a mechanics lean on it and wait to see get paid or get a nice new (to me) Mercedes. After...

Ok so we received this email and wondering if this is a scam. i remember getting the banner ones, but this seems weird -- seeing as they will deliver a 2011 Mercedes E550 car to our location. Maybe if it runs and isn't stolen i could place a mechanics lean on it and get new wheels. Has anyone...

Hey Newagedesigns, how did you attach the Max Metal Panels onto the Donation trailer? Did you screw them down or tape them down? They didn't look like they were in a track.

Because we have readily run through 200K sqft of material in our former L25500, L260 and L360 in a year. and most of the LX610 and Lx850 have over 500k and some over 1MM sqft of material. So, while i think it is possible that in 3.5 years they ran through 260K of material it doesn't make good...

Ok, Latex Gurus, So I'm looking at a 2012 Lx850 with about 300k sqft of usage on the odometer. I am a little skeptical about usage run, and wondering what could have reset the odometer so as not to show the accurate usage? Should i be worried about the low count on this machine? Thanks, Kalvix

I'm looking to purchase some 37 degree Mimaki Blades for the CG-130 FX Cutter. Any recommended suppliers? KD

I know when we were trying to wrap on the military paint a few years ago, we were having adhesion problems. I'm not sure if the new material 3M 480 for example would stick better. They use lots of silicon and radar scattering and such. Has anyone been successful at wrapping anything like a...

they seemed legitimate when they stopped in earlier and set the appointment. but then the salesman came in and we talked about small unimportant stuff for 15 minutes about how they can improve our business but they will bring in different companies to help or do the work or something. then...

we recommend any silicone based wax. these are usually a spray on and wipe around. no carnauba car wax.

We just had the high pressure sales form a SMS Consultants, http://www.sms-na.com/. Felt like i was meeting with a used car sales person. Has anyone had any experience with them or know companies who have used them as a business consultant to do a business analysis. They wanted to bring in...