Search results

I have some Poster view ( clear focus I think) which I think is the same as you are talking about. I have not put any up in a window but have seen some in a video store window. The edges seemed to curl on the sides. It did have a pocket with a rod for weight along the base but the edges still...

Not good when you spell your own sign wrong but still funny.

First thing to always check is that the drain lines (pump lines) are not plugged. If it has sat for a week or two and not been doing auto cleanings (my older printer does not auto clean) then there is a good chance the ink is clogged in the drain line. Use a syring and cleaning fluid and force...

Can you do an encoder check in the printer menu?

Look down over top of the magenta damper and the yellow damper. Just to the left of the brass nut on the damper and back a bit, you will see a screw with a washer (possibly brass). You can get a thin screwdriver down there without taking out the damper and just loosen it. But watch out as...

Just to confirm, did you loosen the screw and then move the lever or just moved the lever without loosening the screw? Also before moving the heads for allignment you might want to do the key pad allignment test prints(assuming there are some on that printer). Temp changes can make things...

The new wiper just slides down and then most times will just bump over that hook on its own and if not just pull the base of the wiper (where the hole is) out a bit as it slides down into place. The hook just holes the wiper down in place.

Those levers will move but you will notice as you get to the spot where the heads are set that lever will stop and feel tight. Unless you unscrew the little screw (look down in the area where the dampers are and see a screw on each head on the right front of the head). Once you loosen this...

Also banding is the look of darker or lighter rows in the print and they are in the same depth usually as the distance the media moves for each pass the heads make. Banding is normally seen when heads are not alligned and is not as noticable in uni direction. Also lowest quality print (faster...

If you were to have said that there were random lines of black, in the print, I would have said clean the encoder strip or blow out around the area of the censor that reads the strip. But seeing how you said by removing the parts from the problem printer and putting into another printer and...

Look up Roland encodor strip on ebay. $89

I think your capping station is the same as the Roland CJ 500 FJ etc. Move the heads off the capping station and slide the wiper a bit to the back. Not much more than a 1/2 to 1 inch. Get a flash light and look down at the right side of the wiper on the bottom. You will see a little clip...

You should be able to buy a longer strip and cut it down and it will work. At least it worked on the older Roland CJ 500. This is coming from another member who did do this. So there is a cheaper way. You may need to make your own holes to connect it. I had been originally told that "only the...

There are a lot on ebay but some are missing pens. Is this an issue or can you buy a new pen? Would there be any issue with registration on a used pad? Thanks for any input.

If you are wondering how to cut straight and measure to get straight cuts then this is what I do. When I set up my banner files I have a standard template made for several sizes. 2 x 4, 3 x 8, 4 x 8 etc. On these templates I have the grommet holes printed as to where they will go and a dash...

I don't do wraps so I had a question. Would that have been laminated? I did not know that cast could be stretched so much and still go back in shape.

The basic way is when they ask you to pay the shipping company up front. They want you to use a (bogus credit card) that they give you to charge $$ to. Then they want you to wire that money cash to them. They get the shipping cash and thats all they want. Nothing else. They can care less if the...

Never met you, never talked to you, but feel for you. Hope it will help. Health is the hard part, the money is an easy fix. Lets pay it forward guys.

Thank you so much. I never had the scale stokes and effects checked. Now I just have to figure how to put the hair back in that I have pulled out:frustrated:

This is in Illustrator CS3 I am trying to make a simple logo for a Cabinet builder. I want to use the upper case letter "A" from the font Quadranta, and make it look like drawers in the lower part of the"A". I will add the rest of the company name beside the letter "A". If I just use some...