Search results

These windows are a b***h to do, The one I did I had to do three times. It seems that when the client open the sliding part of the window, the screen would peel up, not fun at all. I convince him to do vinyl which worked out better. Good luck.

Head clening take off your bottom shield under the control panel, take off controll panel, pinch off all the blk tubing. move the head to the right then to the left. This will unlock the head. Take some cleaning solution and fill the colored caps to the top, move head back to the right till it...

you can use edge tape to keep the edges down on the print material to keep it from rolling up and getting damaged

PET film

Did everyone start with Gerber Graphix advantage as there first program? I still have mine in storage.

Roland Cartridge Recycling Program • You’ll receive a $5.00 credit toward the purchase of one new Roland Eco-Sol Max ink cartridge for each 440cc original Roland Eco-Sol Max cartridge returned. • You’ll receive a $2.50 credit toward the purchase of one new Roland Eco-Sol Max ink...

Check to see if you have any other programs open. There might be issue with too many programs running.

What I do is take car wrap cast material and cut the logo out and apply it to the table drape. I go to the fabric store and pick out something soft and flowey like gabardine I tell my clients to wash it by hand, not by machine. I've made three sofar and not one complaint. The 3m material melts...

Fatten your image , then apply your cut line. hope that helps

take your cursor and move it along the bottom of the screen, it should be there. Some time when I open VW it opens and it minimize to the tool bar. hope that helps.

Nice job, That print on the jeep, did you do that on clear vinyl? I did a Hummer like that and used clear lam, for short term use It came out pretty good the client was very happy. Just mind wandering.

I have a client that has a few cars where the hood vinyl is turning black, see attached. My questions is can I use oven cleaner in the black spots. It look like the sun has backed the vinyl into the hood of the car, I really need some advice on this one. I don't think a heat gun or a steamer...

did they changed out the print head to have it print 1080x1080? or can I get that with my 540?

you could also use banner tape about 1/4" along the edge to buut the edges together. just a thought.

What material did you use and did you use a heat press? It came out good.

Going out around area 51 to look at the stars, camp, eat and drink. Beam me up scotty.

you can print on the other side, you need to let it sit for about 8hrs to make sure its dry. When you flip it you need to have some kind of refence point so you start on the same corner as you did on the front side. On your print you need to set it up to do a reverse and upside down print from...

Most of the backlit signs I do I print on clear and apply to milk plexi, the client is always happy and they look great

Just did a 12' D/S banner for a client and placed a fan to help dry, Started printing that am and delivered that pm.

do you know where I can find a service manual for a VP 540?