Search results

you the man Fred! Thanks!

looking for this one one and off this afternoon. anyone know the BDL font? first thought was addcityboy or sofa chrome but not it....thanks!

Solomons Island MD?

Learn your laminator, love your laminator, and you will be just fine. Mounting is easy. Print your print a 1/4" larger. Fold and crease about two inches back on your leading edge of your release liner (I try to do the shortest run possible (meaning I fold the 48" length of a 3x4) . Flip over...

Mimaki UV Primer

I like the bottom right logo the most, the one with the crab is cool too!

I have done this with Sintra and 040 brushed alum to put on a router. Get some 6" Banner Tape and apply it to your acrylic cut to desired size. Get your brushed alum and cut it to size. peel the banner tape backing. Then get some 1" pvc and lay them vertically across your sheet of acrylic...

My opinion, is I think you can make that shop size work with correct layout and storage. a few things I would do different. I would put the production area on the right and build a wall between. you need to keep you printer, laminator, and materials away from the shop dust, not matter how much...

No but at a shop I worked at years ago (SBT) they had a magnet care sheet. I always warn people to apply to a clean vehicle to prevent scratching, don't slide them, and remove and clean once a week because they will hold moisture. and when they are not being used make a flat box with fold and...

I have never had any major problems using Cut Master in AI with my Graphtec. I have cut runs on printed reflective and runs as long as 10'. for me alignment was key, and a nice thick stroke outside your cutline helps too. I use a straight edge on the leading edge to mark the registration marks...

Clean your lense and check your alignment and tracking.

Fun Little Quiz, failed it though!

How often does the Pinch Wheel Springs need replaced? On my Graphtec 5100 My Center Pinch wheel barley has any tension, making it use-less. It hasn't affected my tracking yet being the center unit. I'm going to get them ordered up and replace all of them.

So Quick! Thanks Jill - - - Updated - - - So Quick! Thanks Jill - - - Updated - - - my Bad Jhill

This one has me! I've gone through all of my systems fonts (3,500) with no luck. Nothing even close to the R. Anyone see this bad boy before?

I think its a bade blade, try your old one and see what you get. - - - Updated - - - I think its a bade blade, try your old one and see what you get.

Over kill and over priced. Make your own if you want it to be bolted, I make something similar mounting signs to a chain link. Make a 3" x 3" sq. Alum washer, round he corners, punch a hole on the center, and use a Bolt, washer, then custom made washer on back of fence and nut and then you have...

what about installing a Clear Security Film over it?

can you post a picture? Look at the tip of the blade does it look sharp, not chipped? Is your blade depth out too much? is your cutting strip down and tight? What offset are you running? - - - Updated - - - can you post a picture? Look at the tip of the blade does it look sharp, not chipped...

Saddlebag? - - - Updated - - - good call mark