Search results

As far as I know, the marks are to be set at a constant distance in feed direction. The Plugin places them every 400mm or so.

You don't need to print daily on a BN-20, as long as you don't use it with white or metallic. With cmykm MAX or Max2 ink, you can leave it unattended for weeks, as long as there is ink in the cartridges.

Look at the commented image.

Your discharge tube is likely blocked! Often the tube gets pinched by the waste bottle. Check that. The cap of the pump outlet has popped off. I have seen it a couple of times. You either need to find the cap in this mess, or close the open pump port with a closed short piece of tubing. (I close...

Nice video My guess for the nozzle plate material is some sort of beryllium copper alloy. And then some coating... Roland introduced a DX4 head with a new type of coating for the LEF UV printers lately. The corrosion around the nozzle holes should make it clear, that no extended soaking will...

Good solution to circumvent the barcode.

Are the OPOS marks read, before cutting? Have you done the length correction?

You could try to rerip and edit the cutfiles. (Remove the barcode part)

There is some media, that just can't take the curing heat from a Latex. It skews the medium and tracking isn't possible. (Had it lately on a brand new Latex800 S-Class2 combo. We even waited overnight for the medium to settle, but it only helped to a small extent) Using another vinyl solved it...

With those printers you can do CMYK-W-CMYK for backlit day and night use or even CMYK-W-K-W-CMYK for window application (the middle k layer is a light barrier that even allows different images front and rear)

I have seen customers adding a felt to the guide against scratching.

The main difference is the ink type and bulk ink system. XF's were discontinued because of banding problems. (At least in Europe) Don't buy XF's, if you need bandingfree quality. The EJ's have some enhancements to remedy these problems. We converted a EJ to a sublimation bulk ink system and the...

Update to latest Versaworks and use length correction. This is normal printer behaviour.

Hello After replacing hundreds of heads professionally, no. Mimaki required to flush, Roland didn't. I sometimes forgot it with Mimakis, they always worked anyway.

There is a whole band of nozzles missing an a lot of misfiring. You can try to clean, soak and flush. But after many wasted hours, the head needs replacement. (If you need a decent quality output with sharp text and without ink spraying)

VW 6.16.1 is the latest and greatest version. It came out last week.

We often had issues with the light heads in the recent past.

RTFM... when you set up a new medium, you can select different ways. (Arrow key) One of them is "width only"

I guess there is... You probably lost the setting in the reinstallation process. Without knowing your cutter type, it's hard to tell. For the cutters I know, it's a cutter setting.

Replace the cyan dampers, then the printhead... (you can cross switch the two dampers and see what happens first,) When you need good quality, black could need a new head too.