Search results

Yeah, the Soljet Pro III XC-540. im just gonna have to experiment.

Yeah, the profile only lets me choose Uni or Bi directional, it is on bi to be faster. My boss asked me to run the printer all night and I told him that is not such a good idea. I told him at most I am only comfortable with about 4 hours of printing while I am away because problems do arise...

I have 312 - 2' x 6' prints that I am printing side 2 up on 54" wide 3651. I am using the Oracal 3651 media profile and it takes about 45 mins just to print two. at this rate it will a month to print these!!! Does any body know of a profile that will print and higher speeds yet still produce a...

Thanks guys!

I am looking for a thick matte poster/photo paper for my Roland XC-540. Magic Intellicoat makes a Total Photo M, have not tried it but it is only 6.5 mil. Roland makes a matte paper as well at 7 mil. I need something heavier like 8.5 - 10 mil. I've checked Sihl, Magic, Neschen, Roland with...

Here is a job I just completed. I used Oracal 3951RA/290G combo. It had about 500 rivets on it. With the help of a rollepro, I was able to complete this job in just over 5 hours.

I am talking about the concave side of the wall here, not the convex. Sorry, I hope this post isn't confusing. The outside convex side of the wall is holding all graphics well, just not the concave side.

Thinking outside the box here... how about using liquid nails on a synthetic polyester anti-curl film? Anybody?

I've got interior textured latex painted walls that are curved like a "C". I have installed Photo Tex on both the convex and concave surfaces of these walls. The convex surfaces I have installed the material on are staying just fine. These are 6' x 5' panels. The graphics I have installed on...

What is PL400 please?

What do you guys think about a panel clip such as a Z-clip for this job? Never used them, but seems like the right hardware for a worry-free install.

you da man!

Does anybody have specs on the sizing of hole and boards. I'd like to make a set. thanks!

I am installing 8 - 3' x 5' 3mm PVC signs to a semi-gloss latex based paint on the interior of a building. Will VHB 4910 (clear, not foam) hold these signs up? Maybe I need some silicone or Urethane caulk to go along with it? Thoughts? Thanks!

I'm not sure if ultimadisplays is the OEM, but Orbus sells the same products, and they are in the USA. www.exhibitors-handbook.com/

Well, the funny thing is, the job already consists of 16 - 3' x 5' Clear Lexan signs mounted with 2" standoffs. Aside from those, the wall murals will be applied to "C" shaped curved walls. The graphics will be applied on both the concave and convex sides. Although, they will be applied...

The guy at fellers also told me to use liquid laminate if there is going to be a lot of traffic around the murals. Car keys are most likely to be the objects brushing up against the prints. I would hate to laminate these and have edge curl. I think I'd rather risk a scratch than edge curl.

I was told by a guy at feller's to use a half inch overlap on the murals. He said the murals he's put up over a year ago with overlaps have yet to curl. I'm wondering though if a "double cut" install would look a lot cleaner? Anyone suggest the best way to install these?

I have an upcoming project in which I will be installing about eight 6' x 5' interior wall murals. I have never worked with Phototex, but have heard good things about it so I thought I'd give it a try. I have a few worries I thought I could get some advice on. First, the knowledge I have...

Is anybody familiar with the laws surrounding the use of vehicle perforation window films? Are there separate laws regarding the difference between 50/50, 60/40, and 70/30 films. I assume laws vary from state to state, but I am not for sure. I thought this would be a good topic to begin as I...