• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Temperature Color Change Vinyl

    Pretty sure I've seen someone wrap a car with it. (Edit maybe it was paint)

  3. window perf, hp315 and head strikes

    Less passes - more heat. It's not very useful.

  4. Need Help Summa F-Series Vacuum not holding down material

    I would also make sure your vacuum adjustor works correctly if you have the tube model. Also worn out belt will dramatically reduce the vacuum. Consider getting a new one if it's getting old.

  5. Need Help Summa F-Series Vacuum not holding down material

    Which model? 1612? Do you know you should align it at the right edge and then adjust the vacuum zone? It doesn't use the air compressor for it. Only the vacuum pump.

  6. HP Latex 64 Cutter disconnecting after every cut

    You must use shielded cable.

  7. HP Latex 64 Cutter disconnecting after every cut

    USB or ethernet? Shielded ethernet cable?

  8. Hybrid flatbed recommendations?

    Maybe Agfa or Vutek if you want some options to consider. Corrugated plastic works really nice on the R. Ink adheres well and you don’t need any antistatic system or even cleaning the surface which might be the case with some UV. If I was you and interested in the R, I would take a look at the...

  9. HP 700W LATEX REVIEWS AND HELP

    https://lkc.hp.com/blog/hp-833-and-hp-838-latex-maintenance-cartridge They will quit the old ones and force the new ones. I recommend to get a large container and a funnel then empty the waste ink periodically. If you let it go to "full" status you basically have to throw it away and purchase...

  10. Summa S2 Cutting Sheets...

    Oh my god just stop confusing each other. You have to install the Gosign and use that. You can't import outside files to cutserver with regmarks and expect it to work, it doesn't.

  11. Need Help How to get Colex registration + cut file through FlexiPRINT?

    Did you try to add it as a cutter...?

  12. HP 365 LC ink ran out during printing and now I can't get the LC head back

    Warranty the head.
  13.

    Hp Latex 360 Printing problems .

    There isn't too much to it. Clean the contacts. Try with the old printhead. You can also warranty the "faulty" one you have and try with another new one.
  14.

    HP 360 Printing Issue

    Your trailing data cable is broken, need to replace it.
  15.

    Hp Latex 360 Printing problems .

    But I see. Your optimizer is missing completely. There is 0 nozzle firing. You need to fix that.
  16.

    Hp Latex 360 Printing problems .

    Take a good picture of the dark area next to 1.
  17.

    Hp Latex 360 Printing problems .

    This one picture says nothing. Say start from the nozzle check and move on from there

  18. Need Help HP Latex 365 Printhead Banding

    Print the nozzle map from the cleaning menu.
  19.

    Discussion I've owned an HP R1000 since April 2019, ask me anything

    Around $1500?
  20.

    Discussion I've owned an HP R1000 since April 2019, ask me anything

    It doesn't take longer than 20min if you do absolutely nothing else. 5min open the covers and remove belt tension 10min replace belt 5min apply tension and close covers Do a little cleaning, check the bearings, remove old grease and add new lubrication etc. 1 hour and 15mins on top to check...

  21. Textured Print

    No, you can't. It's completely contrary to what's one of the ideas of that ink, to be flat and uniform.
Top