Search results

Remove serial cable. Power off/on the machine. In the menu look for the machine reset to factory setting. Select it and execute it. Power down the machine and wait 1 minute (clearing capacitors on main board) Power up the machine. Perform cuttertest from the machine (not the PC) Power of...

Thanks for the reply. I use this set with a colorimeter to make PRINTER profiles. http://spyder.datacolor.com/product-pp-spyderstudio.php Do not how what icc or icm version it produces. As far as I know or have seen there is no way to save in a specific type of ICC file in the DATA PRO...

For Flexi 8.1V1 I made a custom icm profile with a profile program. I follow this to import the file: Open Default Job Properties for the device under the Setup menu Go to the third tab - Color Management tab In the list for "Output profile", choose "Add..." Browse for the ICC File...

No one ever profiled in Flexi? :Oops: Paco

If you look at the colors the top and and bottom are not in a row. One is slightly tilted against the other. If I am not mistaken the 48 uses two 3 color printheads. I do not know which head produces which color. Yellow and Magenata are lower compared to Black and Cyan So this needs a tilt...

Just like the title says. Have this from a friend for the time I need it: http://spyder.datacolor.com/product-pp-spyderstudio.php Where do you start with? I load the test chart to be printed in the RIP. If I switch of "color correction" and then print the 2 test charts is that the correct start...

http://dl.dropbox.com/u/6752581/Mutoh/colorbars.jpg - 4.2MB In this file the heads are not aligned prefectly. They are now? Which rip are you using? Paco

If the testprint is Ok then the head fuse is not blown. Paco

Screenshot from Flexi 8.1 do not know if 8,5 is the same. In the rips advanced tab Check Color mode is not greyscale but CYMK. Paco

Bobby, Thanks for the info. No I did not cleaned the head plates before it happenend. Paco

Chorca, Not a crazy idea. See if people can supply faq from all the problems and answers reported here. Paco

Finishline, Today I encountered a similar problem. Do not know if your problem is solved but I will describe mine. Start machine and do test print. Result all colors blank. Do a cleaning and all colors are there only cyan missing nozzles. So I clean again. Now yellow is disappearing. So I...

If I have time I can take the heater main board out to check for fuses. I gues they would only be ther efor the high current lines to the heaters. But all works except for the temp keys not responding and the blank display. With 4 keys it should take four lines from the 26 line cable then plus...

Chorca, I repaired the cable with high tack vinyl (see other post). Thanks anyway for the response. Paco

Chorca, Yes I am an technical engineer. I forgot when removing the cable to check if the blue tabside should be to the front of the machine. I know how the cable goes into the heat board display and I checked you rebuild (wonderfull write up). The cable in the main board should go with the...

Due to an earlier unnoticed inkleak in the pump the flat cable from the heater board to the heater display was damaged. The white parts on both sides of the cable had come loose and exposed the metal. During the pump change I might have actually shorted the exposed cable wires when removing and...

Does this help? Paco

Hi, Mutoh FOJ new bie user here. Got the machine with two versions of rips. Onyx 6,5 and Flexi 8v1 Using Arlon DPF8000 and 4560GTX vinyl only. I borrowed a Spdyer3 studio set to make new profiles as there is nothing to be found for Onyx or Flexi for this machine or foils...

Nice write up, keep it going until it works :thankyou: I am also in need for the flatcables. I found out the heater and touchpanel are same length and both 26 pins. But at local computerstores not available at 80 cm length. Paco

According to digiprint-supplies.com Epson stopped the production of the heads in 12-2011. If that is true I do not know, but if that is the case the world with heads will dry out and prices will rise. Paco