Search results

Where can I find the service manual of th FO 62" to see if I can assist? Paco

For the head issue and head rank not on the head this the answer from the supplier. make up your own mind about it. :Sleeping: Hi, Epson stopped manufacturing this printhead for Roland/Mutoh two months ago and this explains that the head ID changed. The head is the same though.The...

Got Junior up and running (for the time being). After running over the machine again I moved the head height lever and noticed the head did not lift or lowered. Only the bracket which connects the steel belt to the head was wiggling. Hum......... Took the PH2 screwdriver and turned the center...

Finishline, Did you already replaced the color head you have as backup? If after the start the colors are getting better and after each stop they mix this must be the head only. As long as there is sufficient inkflow from the CMY it has no change to mix. As soon as the head stops the ink has...

Cant edit first message. Wrong> If I take the 2 wire lead to the Y motor off the main board I get the same error message. OK> If I take the 2 wire lead to the Y motor off the main board I get the error message error 074 error Y encoder. In the meantime I took off the Y motor and opened it...

I had this error previous when the head capped or the carriage moved but now it is continously. I have read as much as possible thread for this error and gathered all solutions and possible causes. But in the end they did not worked for me.... :-( I checked: 1] Free movement of the...

Had to work whole day afterI got home I wanted to start working on the black gap adjustment. Unfortunenatly JUNIOR decided the other way. I now only get E074 Error Y current regardless where I place the head. It just move a few mm mostly to the left and BANG error. All is flowing freely on...

FWIIW, If you leave it overnight after a good print. Before you print take the carriage to the left and check the color cappin pad. It should be CYM color. If it tends to have gone black then ink from CYM tubes leaking out the head on the cap sponge and mixed to black. Assuming the longer you...

5 hours later...........:smile: Heaters work without control panel.:notworthy: Now I got it working in the adjustment mode and loading vinyl. I got the colors in line with the black but between cyan and black there is still a gap. Is this a mechnical adjustment (moving the black head more...

I replaced the color head. Changed the color head rank and refilled the dampers. Then the testprint feature showed up and I had to load the vinyl as stated in the service manual and then the testprint would be performed. Vynil placed and it checked the sensors (moving vinyl backwards and...

What did you do when this happend the first time with magenta? As now this is with Cyan and I assume the Magenta problem is gone. Paco

OK thanks Finishline, Then I know I have to take some time for it and not just before lunch. Paco

No one ever changed a color head? :Big Laugh Paco

What time is involved in changing the color head and adjust it when all flows like it should? 30 minutes? Paco

If you place the head near the capping station and power up does the head travel upon the capping station and then shows the error? I had this yesterday after replacing the maintenance unit. I found out the large screw on the right handside preventing the whole unit to go to the right was to far...

OK current color head rank 13115. Supplier mailed me to use 13215. Monday I will ask the technical background where the get the number from. Before I wanted to change the head I had a leaking pump so this was my first concern. The tube inside the pump had a small slit. And ink was spilled...

We wait for the suppliers (official) answer. Paco

Nice, (the write up) not the result. I have to wait and see. My supplier is not in China but in my neighbour country Belgium. Paco

SlightlyChilled, Thanks for your investigation and letting me (us) know. This is what the supplier advertise with. Epson DX2 original, solvent resistant print head suitable for Mutoh Rockhopper I / 38 / RJ-800 / RJ-4100 / RJ-6100 / RJ-6154, Mimaki JV2, Roland CJ-500 / SC-500 / FJ-50 /...

Finishline, New to me that head ranks are not delivered with the head. At my company the boxes that carry the printheads they all have a seperate label on the head and one extra which you can stick somewhere in the machine. Will get on the phone with MY supplier. Let you know the out...