Search results

So I have been in the print industry about 35 years and have not seen this before. We supplied some printed GF 229 Wallmark Canvas for a repeat customer and after they installed it the material started getting horizontal air bubbles increasing as the hours went on. We assumed since the wall had...

We have had pretty good luck using the Versagraphics Peel & Stick Wallpaper for several Casinos. It is more aggressive than the PhotoTex and still has the light stipple finish, no Laminate needed using Canon Colorado 1650. However we have found much better luck wiping the wall down twice instead...

We do work like this pretty regularly and looking at your materials we would be around $18-$22sq’ just for the Materials & Print. Design time we charge $150 an hour, Installation for this would be anywhere from $4.50-$6.50sq’. However I would really reconsider the choice of Laminate as it’s only...

We currently have a Canon Arizona 2380 and have been asked by a client to reproduce several Aluminum Signs used as directionals in a parking area. My question is even with Canon UV Inks would it be better to direct print these or print to Vinyl, Laminate then apply to the Aluminum? signs will be...

Our company currently produces MX, Side by Side, ATV, Snowmobile Graphics in-house. We print using 1 of our 3 Canon Colorado Printers and cut out using a Zund. I could help you out with material referrals, templates etc if you are still looking for help?

Our company currently purchases about 30 rolls of Low Energy Vinyl a month for MX, ATV, and Side by Sides. Recently we have been swarmed by the rep from Flexcon trying to get us to switch to their vinyls, even to the point where he is offering at least 30% mark down from where he started with...

Sort a weird issue, we Laminated some Window Perf for Windows on a Van and 2 days after Installation noticed all the Windows that had Perf were rolling themselves back off! We did a second can and no issues, same material, same Installer. After talking to my guys we discovered that the Van that...

So we have a Building Location in Southern California that we do Building Wraps on and have them done them pretty consistently for over a year. The last one we went out to install this week the material would not stick to save it's life. We were installing HP Optimal Gloss Air GRP. Printed using...

Has anyone had any luck printing Clear Vinyl on the Canon Colorado 1650? Because of the Clear material the printer is not wanting to recognize the material.

We had 2 HP Latex 570s and an HP R1000 Latex. I can tell you we were very skeptical about the sales pitches we got from Canon and how we would save switching to their printers. We mainly print PSV Vinyls for off road graphics and I can tell you that after carefully watching our ink usage for the...

Really appreciate the reply, we will try this now. Thank You

So w have a new Canon Colorado 1650 roll to roll printer. Up til now has worked fairly well. We are just now trying for the 1st time to direct print to Fabric. This was 1 of the selling points for the printer from Canon. We have loaded the most current Canon Profile and are able to get the...

Are you using any of the Moncor Window Perf? If so how do you like it compared to say a Clear Focus?

Has any heard of the House Brand from Montroy Supply called "Moncor" they make a 70/30 or at least they claim to make it but all the data looks to be a Chinese Manufactured Perf? We have a sales person that has a relationship with Montroy trying to corner us into buying it but I can get the...

You can email Clare @ cwinstead@csa.canon.com she works in the Solutions Center and can get you the answers you need. We currently have 2 of the 1650s as well as a Canon Arizona 2380.

Has any on here had experience with both HP Latex 1500 & EFI Vutek UV 32r Printers? We are looking to add a 10' roll to roll option to our fleet. Understanding that the initial cost for the HP is cheaper but what we have seen with our smaller UV & Latex Printers is that the UV machines typically...

Hello, trying to Geta feels of what we are being told by our Canon sales guy. We have ben looking at the Canon 1650 for wallpaper which we feel would be a good choice but our sales guy has stated he feels we could easily replace our Latex Printers we use for Vehicle Vinyls and Off-Road Graphics...

Tonya, my first question would be “do you have an idea of what your budget might be”? We are a Print & Fabricating Company in Las Vegas and we currently have Roll to Roll Latex Printers and 2 Flatbed Printers, 1 is Latex and 1 is UV. If you could give me an idea of what you think your budget...

So I will start by saying sorry for the post and the fact that it will no doubt cause some pretty conflicting responses. We currently have 1 HP R1000 Latex Hybrid Flatbed, 2 HP 570 Latex Roll to Roll Printers. We have a very specific product we are going to be producing shortly that will require...

A lot of these replies are pretty well thought out and appear to have a lot of valuable info. Having said that has anyone done the same amount of costing for an HP 570 Latex Roll to Roll?