cutter

We have an old but very great Roland SolJet XC-540. There's a spot on the printer about about 12" in. Whenever the carriage passes over this spot, the blade toggles up and down a couple times. It isn't dragging over the print or messing up the ink while printing, but it goes up and down, so...

Note: Sorry for the bad quality photo, it's the only one I could find of the cutter and it was sitting in the background, so I had to crop everything else out and zoom in on the cutter. Does anyone remember this cutter? I believe it was called a "linear cutter" or "linear slicer" The first...

For some time now I have had a problem with my HP Latex 54 cutter tracking going off the line sporadically on the Y axis while cutting. I have been unable to find any correlation except that it seems to happen more on larger cuts (over 40" long or so). I will have a single sheet with many...

Vinyl cutting is not a huge part of our business but when you need it you need it. We have had an offbrand cutter that we paid $200 used for 12 years ago and it got the job done. We don't need a lot of fancy but would like to upgrade. This seems like a good deal for heat apply vinyl...

Hello, Does anyone here need a new cutter at an amazing price? still under warranty but not sure if I can transfer it. ? I bought a Summa cutter thinking I would be kiss-cutting tons of school decals but schools don't want to pay extra for this service. PTO/school councils, teachers and admins...

Hi guys, first time posting a classified. I am looking for an electronic paper cutter that is 24" or wider. Must be in working condition. Thanks

Hey guys, thank you for taking the time to read this. First off, just wanted to say thanks to everyone for their support and help. We are using a Mimaki CJV30-130 and I'm having trouble finding any parts catalog/mechanical drawing. The specific part(s) I am looking for right now is an entire...

Hello, I am quite new to the world of sign making, and I have a slightly different use for printer / plotters and hopefully someone can assist in pointing in the right direction. I am a pinball hobbyist and I am interested in printing pinball playfield overlays - that is a one piece sticker...

Graphtec FC8600-130. $2,500 Gently Used at a sign shop in Michigan. We just got two new plotters that are the same so we don’t use it any more. Plotter works like new and has several new blades and also tint cartridge. Ready to use!

Up for sale here is one, Graphtec Cutting Pro FC7000-75 plotter/cutter, which I am selling for $500. I am the original owner. I make a few signs part-time, so this plotter has seen light use. For cutting out lettering and graphics in cut vinyl, it works great. No problems. A few years ago...

Hi everyone, my XC540 started acting up a few days ago. I cut a job and didnt notice until a weeded it that on a part it wasnt cut. Just yesterday, I was getting some media to contour cut and when I did test cut I couldt find the test. Did it again and nothing. The cutter tool didnt go down at...

Hi Guys! I'm having some issues with my Summa. We have a few products that have always cut fine however lately they have been constantly goiing out. The cutter is clean it's length calibrations are fine. The only thing i've noticed is that we set it to a lower speed for more accuracy press go...

Good Morning, I'm new to this community but certainly not new to message boards/forums. My dilemma is this.... I have a graphics guy locally I am using but lately has been a little flaky as far as meeting deadlines and such, as well as the cost of getting graphics made (obviously I'm aware...

I have a Mutoh 1624 and a ValueCut cutter for immediate sale. I closed my in-home business due to personal reasons and have had these machines in storage for quite a while. I'm selling them AS IS. Wanting to sell quickly so make an offer.

Which one is the better deal? What are the main differences between the 2 in terms of tech.

Hi guys, I have a xr-640 roland 2013, single owner. My issue started when performing PerfCutContours, on the right half side of the sheet (Control Panel side) stickers where cutting at the right force. On the left side maybe 13" in some stickers where cut not with the same force. The problem...

PRICED to Sale as a COMBO $15,000.00 FOR BOTH (YES BOTH) Laminator and Color Printer with WARRANTY (purchased December 2017) NEVER used Laminator Roland used less than 10 times since 2017. PICTURES listed are the actual products (not stock) (Must pick up) located 15 miles South of Downtown...

I've attached a screenshot of a job we are working on each different color is a varying opacity of white. We are having to print and take to our plotter and cut the file after the print is complete our issue is the architect wants it contour cut right up against the design which is almost...

i have two cutters that dont work colorcamm roland pnc5000 and a sc1261 uscutter i cant get to cut, wish someone could sale me something i can use or have parts to what i have already

Newb here to large format (screen print background) but we're putting together an innercity middle school print shop afterschool program. 100% committed to HP 115, but I'm wondering about opinions on the Print & Cut solution, and I'm not seeing any in the forum (and I'm betting somebody will...