-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Need Help Red turns to black or dark blue at random
- Thread starter LanceH
- Start date
Hey Mike, The images should be there now. As you can see, the image is printing in focus, just that the colour has been exchanged for black...
MikePro
Active Member
yikes! that is random!
was expecting to see some sort of ink dropout, but looks like the printhead decides to fire all colors at once at random.
possibly a dirty encoder strip or a piece of lint/cathair on the encoder sensor?
else it could be an issue with one of the ribbon cables starting to fail, getting pinched in such a way that it causes a tiny short in the data being transmitted to the printhead during movement.
someone else had a similar issue here in this thread
was expecting to see some sort of ink dropout, but looks like the printhead decides to fire all colors at once at random.
possibly a dirty encoder strip or a piece of lint/cathair on the encoder sensor?
else it could be an issue with one of the ribbon cables starting to fail, getting pinched in such a way that it causes a tiny short in the data being transmitted to the printhead during movement.
someone else had a similar issue here in this thread
Last edited:
Jim Hancock
Old School Technician
Does it do this in any other files? Are these labels step and repeated as multiple copies in Versaworks, or was it done in the design program? If in the design program, look into your created file for something hidden in that area, maybe some kind of mask.
Jim Hancock
Old School Technician
Adding - if you reprint the file in the pic, does the black square show up again? And in the same location?