Search results

Im looking for another flatbed that is similar to the Gandi 3150x2 or better. Used only. Either same or better printer. I print on Styrene, Ultraboard, Sintra, Coro, Alum. Maximum 6'x10' or better. I've already seen global garage. but I want to see what else is out there. Thanks CWB

Anyone know what the vacuum hoses are made of under the table? There are 3. One of mine broke in two. clear high pressure vacuum hoses. Where can I get one?LOL its always something. CWB

I use Onyx 10.1 with the Eye 1. I can make profiles but they still seem too grainy. My Eye 1 dosnt have the printer License but still seems to work with the onyx. Could that make a difference? Im trying to make a 300x600 dpi profile for styrene. Printing with a Gandi 3150x2 32pico heads and my...

So anyone know how much this printer is? 1600x1600 dpi per second 70,400 nozzles 42" 3 billion drops of ink per second!

Which Flatbed printer do you guys think is the best? Using all these basic factors. Cost,Maintenance,Ink,Size,Quality output,Speed,Materials. roll fed built in or not. Thanks for any input. CWB

On the Jeti 3150x2 I got some graininess that showed up in my prints and I was wondering what causes it. It just started doing that. I'd like it to be smoother. Colors look good just needs to be not so grainy. I wrote a profile and it was worse but colors are good. Using Onyx 10.1/Uv Ink Gandi...

I made a profile color looks nice but its a bit grainy. Anyone know how to fix that? Im using a flatbed printer uv ink. Printing on Styrene. Using Onyx 10.1 to profile with and the I1 from xrite. Cwb.

Onyx Ver 10. $995 Eye One Basic Pro $995 Is it just me or is there a problem here? Does anyone know if Onyx Version 10 is worth it? Im starting to doubt this whole color thing. I think were being gouged. Does anyone want to expand on this?:toasting:

Besides Flexi. What other design software works well with the I1? I want to be able to measure a single color from any type of material and place it in the artwork. I currently have Onyx Rip, Illustrator,Photshop, Freehand. Thx CWB

There's a new problem everyday. Now the ink bucket has a problem going up. The screen says heads are capped. checked air, reset printer fixed it temporarily. Gandi Jeti 3150 x2. Out of Ideas. Cwb

My black looks a little weak. I need a stronger black print. I changed the filter besides art what else could it be? Jeti 3150x2 flatbed printer. Thanks in advance CWB

I have new uv lamps and when I put them in they warm up and shut off. The old lamps work just fine but they're life limit is expired and i'd like to replace them with the new ones. I have two sets of lamps they do the same thing. Anyone have any ideas what Im doing wrong? Like I said I put the...

Today my Jeti hasnt been able to print. We had a electrical storm over the weekend out some of our power was out. However the printer started up and the print carriage will make the first run down the table and just die almost at the end of the strip and coast the rest of the way into the metal...

Has anyone running a Gandi seen this problem before?(see pic) A session error of some sorts. Rebooted the machine and this message popped up. We're Running a Gandi 3150 5'x10' flatbed printer. using Fedora O.S. and Gandisoftware. Have had issues with full HDD before but not like this.

Does anyone know a fix for ink dropping from the heads. I think its a low vac. problem or air pocket in lines but i can't seem to stop the ink from dripping. Very hard to print this way LOL. Any Ideas? I appreciate it. Printer: Gandi 3150 X2 5x10 flatbed Cwb

Does anyone know where a good place is to get Gandi 3150 X2 parts? Im looking for Ink Filters that connect right outside the ink tanks. Thanks:peace!:

Gandi Jeti 3150 x2 and Fedora os with Gandi Software. Im trying to print in 3pass I know im not to expect too much out of quality but it looks like with each pass the gap is too wide like a feed rate problem. 6 pass is better but you can still see it just smaller. 9 and 12 pass the problem...

Does anyone have an idea on how to fix the ink level status on the monitor? My Magenta says empty but its not. Im running a Gandi Jeti 3150 x2 and Fedora os with Gandi Software and the software says the Magenta is empty. I tried unplugging the cable to the Ink Resevior and plug it back in but...