Search results

Anyone have any thoughts on the onset printer? I don't know much about it. Problems with it? Does it work? Lol. Is it old technology? DOes it have value? thanks for any input.

I have window graphics and they look like they have wet streaks in them. After applying them with a felt squeegee. How can I minimize the wet streaks in vinyl. Its clearvue window graphics that have been laminated.

Something weird happened recently. 24 print heads suddenly quit firing! Cyan, Magenta, and Black. The other 24 are good. I took a filter out and dissected it and it was clean as a whistle. Took a print head out that was bad cut it open and it had ink that was coagulating near the jet tubes as...

Have this epson printer and having problems getting files to print all the way. Half the file only prints or 3/4 of it. and thats it. I have the latest drivers as far as i know. Not sure this may be a networking problem. Anyone have any ideas ? I appreciate it.

I have a flatbed printer in one end of the shop. and a Multicam Router at the other end of the shop. I want to print barcodes and let the Router pick it up and cut. Problem I'm seeing is the barcode cut file appears to be .xml. This would work if I was cutting from the same machine thats hooked...

Konica Heads or Ricoh Heads

What do you all think about Scitex Ink in the Hp printers? and are Ricoh heads superior to everything else?

How much are these FB700s anyway? Says they'll run 860sq ft hr but what does that really mean? what will it run in production mode quality?

Anyone seen one whole head stop firing? I have 1 head and 1/4 of another just quit. I've done everything I can think of to clear it up. I manually shot flush solvent through the troubled heads. reset I/0 board checked connections and reset the entire machine. primed and purge.. Im at a loss

Does anyone know how to flash an LCM Board on the jeti3150x2? I've done it before but cant remember how it went.

As some of you know I run a Jeti 3150 x2. And the question I have is how about printing white? I understand it takes about 4 hours to set up the white and get it printing? I have enough work to compensate for this down time but does it do a good job? does the white look good and are there any...

few months ago we replaced K9 relay on our Jeti 3150x-2 gandi. and that seemed to have solved our problems until now. We get the lamp 1 sum error again. Relays look fine. It always seems to shut off after 2-4hours of use. or the temp is higher than 82 or both. Filters, relays, everything looks...

Does anyone know which machine prints on Cardboard? I see cardboard displays in various stores and I was curious how they print on that material. I imagine its a white cardboard on the face side. and cut and folded up to make a stand or display.

Does anyone know if you can put in a smaller picoliter that 30 in a Jeti 3150x2 printer?

Got a question for you flatbed printer boys. I have about 600 sqft just guessing. I got a flatbed printer inside that room. It has a garage bay door. leading into a large warehouse. I like to keep that bay door open a little to let the fumes out. but when I do that the cold air escapes. so Im...

has anyone ever heard of a printer that will print on window blinds? or a printer that will adjust its head height as it's printing? or both?

Anyone know how much that CET XPRESS 500Q is going for?

What do you all think about the Acuity Advance HS X2? We do alot of long runs 4'x8 to 5' x 10' and Jeti 3150x2. Quality seems better on Acuity. Are there any hang ups or querks about the machine andy gripes?

Color Shifting from day to day? It starts with priming the print heads. When you loose nozzles you shift the color. When you gain nozzles you shift the color. Duh. So after every prime and flush check your color against the original print or your target color and make the adjustment needed in...

We recently screen printed on Bright Brushed Aluminum sheets. White first then a 4 color. Then we let those cure 24hrs. Then we ran those sheets through a laminater to apply transfer tape on top of them for protection during a laser cut process. but we found out that the Transfer tape pulls the...