Search results

They informed me, after I had completed the job, that their terms were "net 30". Fine. I could live with that. I sent the invoice. But it has now been 60 days. 30 days beyond their written term statement.

Anyone done any work for "Edward Jones" Financial? I invoiced them on Dec 1, 2021 and still no money. They owe me over 5k

I'm looking into installing some external LED lights on the ground in front of my monument sign, The sign is 16' long x 9' high. What type, how many and what wattage etc would you recommend? Thanks

Mine has been on for too long and is cracked all over like a dry lake bed. Would rapid remover be best or something else? Thanks

I ordered from Glantz, thanks!

Grimco is out of some of the letter track I need. So I checked with "Sign Letter Depot" . no email replies, no phone on their website, googled a number and no answer. They seem to be either on vacation or closed down. I checked with another outfit "National Readerboard supply" and it would cost...

Just discovered it has Rhino Liner sprayed over the whole vehicle, including the fabric.. Does Oneshot stick well to that?

Customer wants his logo put on the doors of his Humvee. only problem is the doors are covered in some kind of "canvas" which seems to have been painted black but the "fabric" texture is still quite prominent so I don't think vinyl is going to work. What kind of paint would you suggest for...

The way I do it, for 1 sided signs, is to laminate "backer boards" of HDU to the back of the sign with Gorilla Glue(polyurethane). I wet the back of the board, run strips of GG on it and screw it to the back of the sign, only about 3/4"" in or so is sufficient. I countersink the heads just...

I have a couple spots of "U-Line" #623 sandblast stencil lifting off some HDU. I had taken it to the local monument company for blasting and the blaster-guy didn't catch it in time before it was "GrainFraimed" under the letter. Now I have to either carve it down, or built the place back up with...

Due to the thinness of 6mm ACM, I'm thinking of just going with 12 or 19mm PVC. I could glue PVC standoffs tot he back, screw in some stainless screws and use those as studs. drill holes in the wall [stucco], fill holes with silicone and push in the studs. What do you think?

stucco

Is this the correct Lexel? https://www.lowes.com/pd/Lexel-10-5-fl-oz-Clear-Paintable-Solvent-Caulk/4714985

What is the best way to attach a 4x5 shape, cut out of 6mm ACM, onto an outside wall without fasteners showing on the front? If there is a way. Thanks

Had a large job done in "high performance" 751 which faded, cracked all over within 18 months and Oracal would not make it right. I use 3M now.

Trying to cut some large pieces of sandblast stencil and the stuff is, of course, much heavier than vinyl. Is there a way to reset the "rapids" on this cutter so that, between cuts, the thing doesn't lose registration from all the snatching when the grit shaft shoots it back and forth? Tech...

I rolled some latex primer (Zinser 1 2 3) on some slightly rough PT timbers and need to take it off. What is the best/easiest/fastest paint stripper for this? Is there something that can be applied and "hosed off"? It was just put on Saturday, thanks!

For routing on the CNC, Duna is fine. But, from my experience, it is hard to sandblast. The jobs I have upcoming are sandblasted.

I've used several brands over the years; Signfoam, Precision Board, Evergreen, Duna, DesignBoard and maybe a couple others. The best bang for my buck was DesignBoard. I've made quite a few signs with it, many have been out in the weather for quite a few years, and never had any problems. But...

Never mind, I just now got a call and a PO#, I got the job. But I wasn't about to hand over the production files if I didn't. Thanks for the feedback. :) This is one of the 4 old signs...