Search results

A hybrid never has the capability to print on porous substrate. The r2r can print the whole day and night, while fb needs the sheets to be loaded. If you are not in need of these possibilities of wider range of substrates or quantities then you can go with hybrid. It saves you space, and time...

Goto https://downloadcenter.rolanddg.com/VersaWorks6#software and download latest version and „For customers who are using “Windows Defender”: Measure for “Windows Defender” anti-virus scanning.“

Printquality is not on the level you can reach with Rasterlink. In your case I would go with Mimaki RIP since they control there special pritmodes in the correct manner.

Maybe because of the printbed-design. Does the streaks lineup with the pits and lands of printplaten? Try to reduce vacuum as much as possible.

Aquity advance select / Arizona 460 is cheaper an does also has the option to print cmykwv. 480 has ccmmykwv. 660 / 550 is way more expensive due to second row of printheads.

nope, software is not prepared to print varnish. Software can just handle cmykw

If well maintained this unit is very stable. Varnish is not possible since the process to print and cure varnish is completely different then colors/white.

If your alignment is done manually with well prepared Printheads , then it might be the best with the actual degradation of ph‘s.

12 pass, 110% ink, 180º curing, 30% vac, 30% optimizer. 180º curing is impossible. At first I would reduce optimizer as much as possible. Then reduce curing and drying temperature to lowest value. Curing around 70*C. Slow down printing that substrate is longer in curing chamber at lower...

The vacuum error is a sign of high rate of air pump requests. So somewhere meniscus or degass vacuum is dropping frequently, meaning there is a leak somewhere. Air pressure pumps are located near ink pumps. Tubes are going from pumps to pressure sensor on system control pca and to accumulator...

on the legs you won’t be able to adjust head-media-distance. If there is a need to adjust you have to adjust the gantry. And this is not trivial since you have to adjust slant as well. A magnetic dial gauge isn’t helpful since there isn’t any magnetic metal used on accessible parts of carriage...

It’s about the second dropsize. You should leave the 6pl on, but in fact you need to do a new color calibration with this. To check if table is level you can mount a dial gauge to the carriage and with opened drawe you can move carriage over entire table to check for differences. Maybe magnetic...

In caldera you can activate and deactivate each dropsize. Deactivate the 12pl drop, since it might cause deflection due to charging effects.

For which reason you would like to store it? Doesn’t make sense to me. You won’t be able to demonstrate and sell it. So I would decrease pricing until sold.

Seems that you are loosing nozzles on high ink load. This could be related to almost everything. Meniscus to low or instable, ink flow, filter in PH, …

For printing on shirts I can recommend the Ricoh R-1000. you can print even on black fabric and DTF. And maintenance is really easy. Just shake the white cartridge once a day. Latex isn’t a good choice and UV is forbidden in my opinion due to the fact that you can’t control the polymerisation in...

Two possible scenarios: ink buildup in this area prevents from ink being fired. Visually inspect if you have ink collected in this area after nozzles get lost. Or missing ink in this region. Check meniscus filter and replace. Could be also the small last chance filter in the printhead under the...

Check wiring in between engine pca (the longest pci card) and printmech pca (behind power supply)

Check if bowing compensation of print platen is activated. Also remove the metal arm on the left side of dancer that prevents dancer roller from rotating. Also fix the banner only in the center and cut sides in an angle from the middle. If that doesn’t help check the gap on several positions...

Maybe something gets corrupted in your profile. Try creating a new one from crate with color calibration and icc, sync the media library and reprint the file.