Search results

Make sure when you replaced the head that you cleaned the area around where the print head sits. Ink tends to buildup and cause the head to stick in place so the alignments won't move. but you're on the right track. You should always do the alignments in order. Bias, Vertical, Horizontal, and...

The actual alignment is handled by the printer so Rasterlink shouldn't have anything to do with it being off.

OK so this should be an interesting one then. The print/cut alignment is coming from Rasterlink just like a regular job so your print/cut jobs should be just as accurate. I'll have to think about it. Hopefully someone else can chime in.

If it happened during the print, the crop mark sensor most likely hasn't been affected as it wouldn't have been connected at the time. When you do the print/cut alignment with the crop marks, are you also testing it on a print and cut job with crop marks or without?

Most RIPs have color charts you can print and also load into your Illustrator or Corel software. So you print the color chart, have your customer choose the color they want, and then select that color swatch in your design software and it should print the color you want. Let us know what RIP...

Keep in mind that Mimaki looks at the printer from the side on so the Y axis for people like me who works on them is actually left and right and the X axis is up and down. I assume that you're having issues with the alignment left to right? Also, the alignment process for "with crops" and...

How much memory do you have on the computer? If it's too low, the OS and other programs could be using what the RIP needs.

Also make sure that when you're saving the PDF, the option to, "Convert Spot Colors" isn't checked.

Here's what chatGPT has to say when I asked it if AI has gone too far because it can make pictures of presidents with mullets: No, AI has not gone too far if it can make images of presidents with mullets. The ability of AI to generate realistic images using deep learning algorithms has advanced...

Head heat tends to blow the fuse but it's not the actual cause. You're going to need to find where the short is happening that is causing the fuse to blow or you will just blow the new fuse too. It's usually going to be the head cables that are bad but it could be anything from the head to the...

I agree it seems electrical and I would start with the head cables. That being said, I've been doing this a long time and I've never seen a pattern like that on the nozzle test. Something funky is going on.

Either the head is dragging on something with ink on it, ink is built up on the bottom of the head, or the head may be damaged internally. I would check the bottom of the head first to make sure you don't have a ton of ink building up which makes little inkcicles that can drag on the media but...

When you take the cap top off it will expose the tubes connected to it. They are just friction fit so you just pull the tubes off the cap top. Try to grab as close to the cap top as possible as to not stretch the tubes too far. Then I use a tapered syringe with cleaning solution, stick it in the...

I've heard they all turn black.

You could probably do it yourself. I'd contact Mimaki and let them know you're far away from any tech. They might just give you the manual.

There is no official procedure because technically you're not supposed to switch. Normally you just need to flush the machine and then change system parameter number 32 to whatever ink set you want to use but unfortunately it's more complicated than that on the CJV150. Most CJV150s don't support...

I'm not sure what the metal for the nozzle plate is but I do know it has a Teflon coating.

I actually have used ChatGPT and it was pretty interesting. I asked it how to fix a Mimaki printhead that has clogged nozzles and gave a nonsense answer. My job is still safe for now! If you ask it very broad questions it does really well. The coolest feature was I could describe a Python script...

I read something the other day that is related to this. It said, " AI isn't going to take your job; the kid who knows how to use it will."

Yeah that sounds right. I was looking at the wrong type of ink.