Search results

It is all about QTY, what are you deeming as bulk? You order enough and then importing is an option, I would look into buying full sheets of 48x96 and then having a metal fab shop shear cut and round the corners or (what we do) take the full sheets to someone with a water jet cutter

Depends * Budget / Short term edge cut and done * Longer life / want to look good. Overprint and edge (canvas) wrap to the back side We only use edge trim cap on MDO or fluted ACM

If an "exact match" is required take good photos, and trace the text

Test the wall before taking on the jobs ESPECIALLY if you are doing the installation!!!!!! try wiping it down with alcohol "scuff" the area the vinyl is going use ONLY high-tack vinyl If you need the "matte" finish, use matte lamination on high-tack vinyl Use the LOWEST tack transfer tape you...

If the customer is reluctant to give a budget, we will start asking * Expected life expectancy * type of sign they want ** This requires them to show an image / photo * Where it is going (interior, exterior, wall, pole, hanging, etc...) Once we know a size, 1 sided / 2 sided, illuminated...

We use 12mm PVC for out work surface https://www.signs101.com/threads/cutting-mats.166534/#post-1545168

A full-color DTF will feel like HTV

Signs365 FireSprint ABA B2 Don't know and highly doubt there are any vendors who use this machine for trade work most are UV

the "cheapest" printhead we have tried is from https://us.digiprint-supplies.com/en so far they are about 75% success rate on a print head being quality

FireSprint.com ABA Visibility Products B2

I'm more concerned / impressed with the lines lying across the boom

We try to use Modified Acrylic "white" 7328 to help with the washout. we also add white vinyl on the 2nd surface if needed, especially if the cabinet is too bright or an LED retrofit

https://www.signs101.com/threads/my-new-sign-installation-command-center-aka-sicc-vehicle-haha.131543/#post-1283508

Where are the videos? are y'all using office chairs or a 2 man team with shopping carts?

We like 3/4" or 1" 40 PVC or 80 PVC (depending on the span) 80 PVC is a thicker wall (More Rigid) instead of 1 LONG piece, we use INLINE COUPLERS so we can make whatever is needed and also collapse whenever needed To keep the pipe centered, we will have the pipe stick out of the pole pocket...

We edge cut perf and then use optically clear lamination to edge wrap and also seal https://www.fellers.com/fellers-shopping/cat/wrap-tools-and-supplies/sub/wrap-care/set/3m-3m-8914es-or-8520-edge-sealing-tape

We are seeing this more often with newer glass or glass that has been treated, rain-x or a like coating We edge wrap with optically clear lamination strips, or we use an edge seal pen

We use MATTE banner It is usually the same or cheaper than paper of the same size

Looking to get 150 + long Sleeve shirts that will require full sublimation printing & sewing

https://www.distributorcentral.com/