Search results

I never use quick mask, just regular masks, however I would suggest if it is not a hardware problem (out of hard drive space or RAM space) then I would just re-install Photoshop and avoid potential lost work.

I think you might find one here: https://www.the-blueprints.com/search/mustang/ I am not sure what all model years are compatible with 74...

I know we throw away thousands of dollars a year from ink cartridge waste on our Mimaki printers. The carts read empty when it seems like they always have around 5-10% left in them. Putting a small 1/8" shim under the rear wheels helped cut it down by about half of what was left in each...

You can use any other lint-free wipe along with 99% ISO alcohol, using lesser percentage alcohol can leave residue from the water content. Sounds like you have a pixel going out though, you may have to waste a foot of print before each print with a "block" of solid color to help warm up the pixel?

Put in there that you are looking for experienced employees, familiar with sign making, design, production, installation, etc. If they have to know certain software, put that in there also. You'll get less responses, but you'll get more qualified responses.

It does NOT sound like you are looking for experienced employees by the wording of that ad. It sounds like you're looking for someone who can learn.

Couldn't find it, ended up cleaning up ALL of the paths in Composer to make it work. :( :banghead::banghead:

There are many little problems, zoom in and check it out in outline view. Maybe there is a clean version out there?

This is not the only lettering to go on the new truck, and they want to see it multiple ways in my proofs. (arched, straight, etc) So, cleaning up all those paths will be a pain, but that might be my only option.

No. This is for a fire truck. Aint gonna fly.

It doesn't seem to have as "spikey" of serifs though, especially when I try beefing it up. Any others out there?

Scary aint it? It looks all fine and dandy until you zoom in on those paths!

I thought I had this font figured out, but apparently the "font" I have is no good... I had "English Towne" as the font I was going to use, but that font isn't any good for cutting. Any idea on what font I should be using?

bad chip on the cartridge.

Do a search here and see what people have said about them. We had a GFP laminator where I used to work and it was NICE. We have a Seal & Chinese oldie here and they suck big time.

I would also try replacing a few other components, sounds like something else is also going out. Hopefully you have another old computer around and a competent repair guy to help you out. We run our Gerber Edges here off of Win7, but we are running Omega 4+ so we can use USB-to-parallel cables...

I purchased the similar deal a couple months ago, was well worth it to get the fonts. Not sure that I will ever use much of the artwork for commercial work, but I did knock out a personal project for the owner's family using some of it in just a few minutes. These deals are actually ran through...

"Jumbo wide retractors" have two poles. https://www.creativebanner.com/ProductPage.asp?id=&stype=sub&cat=Retractors&sub=Jumbo+Wide+Retractor

At the first sign company I worked for we only had a Roland Sp540v for print/cut. If we were laminating in-house it was spray lam (frog juice), but that only works for "flat" decals; not wraps. When we needed something laminated (like a wrap) we found a couple local wholesalers who would...

Every Adobe program (and almost every other software company) has always been like this. it is done to encourage everyone to upgrade once the upgrade comes out, and a lot of the time there are specific features in the newer program that the older program cannot understand, therefore making you...