Search results

Enter the menu in "Ink Control" section. In "Empty Mode" settings, put it on "Stop". Then the printer will stop if it remains with no ink in one cartridge. If it's "Continue" selected in that mode, then the machine will print without a color, the printer ignoring the fact that is running out of...

Mimaki JV 33 is a good choice, but I would go for Roland RS 640 or SJ series. The quality it's the same on both brands but it's about speed. I think Mimaki is faster but Roland is more..."user friendly" and you can find service and spare parts much more easy then Mimaki. But this is just my opinion.

It's very important to know what kind of ink are you using. Why don't you try to use Colorip or Colorchoice? Or maybe Flexysign...I don't know if it's compatible. But it works great with colorrip and you can easily find some ICC profiles for that.

Try IPA or some liquid soap in semi-hot water for plastic surfaces. For metal surfaces you can use cleaning liquid without any problems.

Black ink contamination in the cyan damper. The cause might be the cap top or the pump. Check the tube from the cap-top for clogged areas. Also check if the pump works as it should.

...So, you must replace the print-head :Oops:

:U Rock::thankyou:

You made the right choice! Those are small dampers for 1204. The big ones are for 1604 model. Good luck!

Hello guys! I need a service manual for Mimaki JV 5. Please help! Thanks in advance!

How the nozzle check? Do you have any misfireing nozzles? That might be the cause. If the test print is fine, then the print head must be replaced. It's very possible to be a static issue but I don't think so. Check the print-head surface for any dry ink spots.

...or you might have some damper problems. Try to perform some powerful cleaning and then make a nozzles check. If the problem is still there, you might need some new dampers. If you replace the dampers and the problem is still there, maybe it would be better if you call a technician.

Welcome from Romania!:Welcome:

Try to adjust the feed calibration. For banner material, The feed calibration must be set at a higher value, because the material is thicker them the vinyl.

The ink has nothing to do with your error message.

I hope this will answer your questions.

Use the thick print head hight! This way you will prevent media jam and head crush. 540 x 720 is very good.

Hello and welcome from Romania!:Welcome:

Roland service code : Down, Right, Left, Up, Right, Down, Left, then press Left, Down, Right in the same time + Power on. Hope that helps!

Hi, There is no problem with those wipers. I use them for 4 tyears. No problem until now. I also have a Roland.

Welcome from Romania!:Welcome: