Search results

It's not unusual for the sheet cut blade to interfere with the pen block if it doesn't reset normally. As JB said, take a pen or pencil and push it in the left side of the carrage and make sure that the plunger is out (to the left). With the power off, can you move the tool holder up and...

It probably depends on the life expectancy of the print. If it's for a weekend promotional, you could probably get by without the laminate, but if the bus will be washed with the print on, it needs to be laminated. Overcoat is not a replacement otherwise no one would put laminate on vehicle...

Yes it is in the Adobe program folder.

They also have to pay that tech $50 per hour when he's not doing billable work as well, so they're not pocketing the rest. They're investing it in a system that supports their customers. Do they bill you for the time spent on the phone trying to figure out what's wrong before they come onsite...

Versaworks 6 will not run the SPv series. You'll need to continue using VW5.

That's a long way from the old Gerber digitizing tablet that I mastered years ago. With the Numonics tablet and 4 button puck. I'm feeling old now...

I've never used anything but OEM, so I can't tell you what the difference is. I've seen many reports on this forum from members that I trust that say there is a difference. If you've had good luck with them, that's great. It may be an application issue. I've never had a problem with OEM cap...

No need to uninstall. Like the message says, initialize the application. It's in the start menu>Versaworks. This will return the software to a "New Install" condition. You'll need to reenter any devices and it will clear the job folders, but there's not a great way around it. Likely it's one...

You can find the swatches in the Program Files>VersaWorks>Swatch>Illustrator folder. You're looking for the Roland VersaWorks swatch, not the color system swatches. Good Luck

If you take the cap top base out, you need to mark the bed where it goes before removing it. It is set with a jig at the factory. If you just removed the cap top to replace it, the only calibration done regularly is the flushing position adjustment. But that's a left and right thing, it looks...

When you have two magenta channels, it doesn't print with one of them (except when doing nozzle test prints or other internal prints.) You'll want to swap the oldest one over to the active channel (the one that is magenta only) to keep your ink fresh. And as cornholio said, these printers go...

Generally it's holding down the up arrow while you power on. I'm not sure if it works on that model or not. Good Luck

Half that price... https://dgastore.rolanddga.com/wiper-head-felt-vs-640-1000006736

The primer is just for promoting adhesion where inks may not stick as well. I doesn't help with the build up of textures. I hope this helps.

Is that a motor error or a service call error? Like Cornholio says, a picture of the error would be helpful.

Versaworks 6 doesn't support the your printer. You'll have to use the original VersaWorks on a computer that supports it or see if you can get versaworks to run in a compatibility mode or something.

Yeah, time generally improves the adhesion like most other adhesive vinyls. It didn't always prevent the problem. There was an issue with that generation of ink. That's why the next generation of inks includes a top coat that you can turn off for laminated prints. Must have Gremlins in the...

Yes, it's been found that if you give the laminate adhesive more dwell time on the print, the adhesion is improved for when you go to stretch and apply. Good luck.

Check with an Airplane Mechanic. The FAA regs get really strict. Good Luck

Lock or unlock the guidelines by right clicking on the guideline and make your selection: Right Click menu and Design Central are your two best buddies in Flexi Sign. Good Luck