Search results

Hello All, I have a quote I need to do and I am not sure what substrate to use any input would be great. Here is the job I have a wall that is 7' tall and 40' long it is a sheetrock wall with wood paneling on it. The customer wants us to do a digital print vinyl wall mural that covers the...

Has anyone ever used Lamex Laminate? I am looking at Lamex optically clear 2mil cast PVC laminate and was hoping to hear what people who have used it thought about it. So please any feed back good and bad let me know thanks.

Do a search for posts not topics from K6media he has put up some good info on wraps and photoshop and illy. Most people who have been here for any length of time will tell you he is good so search and you will learn. Good Luck

I have had the same problem with windows 7 64 bit and Flexi 8.1 it will install and it works great but it will not give me the 1394 port in production manager. I have installed the newest driver for 64 bit windows 7 from mimaki and it gave me a printer in the printers folder (so it installed...

We run the triangle inks in our JV3 160S have no problems works great.

You can try what Mikepro said but I have a JV3 160 and had a brand new head work great for 3 or 4 days then half the test draw pattern went out then a few hours later that whole side of the head was gone. It did pretty much what your saying yours is doing. Everything seamed to work it just would...

WELCOME I hope you didnt take my first post to heart just letting you know to tread lightlly for a while. Again welcome and I will help when I can. I agree get a heat press and you can turn some great profits. Besure to check around to see what the pros are charging. Even though this is part...

WGRoper, I will tell you that there is lots you can learn here however be very careful and do lots of searches first as we are professionals and will help but we dont really take to Hobbiests well as you tend to undercut us produce lower quality and then you are gone and we are left with the...

Sorry I am using a JV3 160S. I also have a bulk ink system so can I do a hard clean? I was told by the guy I bought the printer from that I can only run fill ink and nozzle wash because of the bulk ink system is this correct? I didnt think that 3 nozzles would cause such a massive stripe in the...

I gotta you on the corect linerization thing. I am running Flexi 8.1 and I dont see anywhere to set the total ink limit. I can readjust the linerization for each ink in flexi production manager but I dont see where to set total ink limit any help would be great.

Ok I am pretty new to printing and I am wondering what to look for in proper and full saturation level of inks. I have adjusted my ink linerization down to a pretty good level ( I think the prints look pretty good but reds are a liitle dull). I am not sure if I have the inks right they might be...

Ok everything is calibrated and all prints well except magenta it has white stripes. I ran a nozzle test print and I am only missing 3 nozzles the test print has 3 bars missing on magenta only and none of them are next to each other. I went into flexi made 6 boxes 2" tall and 6" wide and...

If I recall when you do a test print for adjustment it prints the bars then you look at the bars and input the numbers that the bars are aligned on if you print the test pattern again it DOES NOT move the alighned bars to the Zero position. So if you run the test print it will seem to be off but...

K6 did not start the thread and his user name is K6media all one word. Isign did you figure out what I was saying with the slice tool might save some time for you not having to canvas the image multiple times. As for when you copy, new, paste in photoshop photoshop automatically sets the new...

Sounds like the screen has come loose and you are going to need a new head. I have a JV3 160 S and have taken a head apart even broke it open to see the insides and if it is leaking from around that ring you are going to need a head in my opinion. If you order a new head take that one apart and...

I know nothing about your printer but I do know electronics. Try swaping the cables from the head at the board level just plug them into another heads location and the other heads cables in to the head in questions slot if the original fuse that has blown blows out again then it is not the head...

when you select the type tool look at the properties in design view box select the A tab and look it may have kerning added to it or its set as Italic as stated above.

Yes that is correct.

I recentlly did business with http://www.solventinkonline.com and just wanted to say that there price and customer service was great. They do alot of ebay stuff but if you call they will usually give a better price as they dont have to pay the ebay fees. Hope I dont get in trouble for this...

I dont have 64bit running my rip but I will in the next week or so I do have windows 7 64bit as my design station. When you installl anything on windows 7 64bit ( and I assume vista 64bit) you have 2 different program folders one is X86 and the other is not if you install to the X86 folder it...