Search results

To answer yoru question about grey: In Flexi, I use values of black to get a grey color on my Mutoh Valuejet 1624. It works like a charm for me. When I go to print, I go to the output settings, select the color settings button then go to rendering intent. On the right the Pure Hue buttons will...

We slow down our printer to unilateral pass so that it's only laying down ink in single pass

I haven't removed a lot of them, but the few that I have removed have come down pretty clean. At the most some paint has come up but nothing major. I haven't seen a need to replace any sheet rock.

Yes. When we do wall wraps I tell my customers to paint the wall with Zinsser if they are remodeling anyway. If painting isn't an option, I usually use 3MIJ180Cv3 like Precision mentioned. I've also wrapped walls with Arlon 8200 which has a higher tack. But I always do a test for my customers so...

The suspense is killing me...

Agreed. I have wrapped boats with 3M 180Cv3 and with their 2080 series of wrap material. I also use Arlon or 3M cast material for boat numbers and names. Works very well.

I think that's called mansplaining.

I don't think the lady is being picky. I've done my fair share of food/coffee trucks. That's real poor quality. I think you can handle this. I do the same as you. If I get a low res file from the customer, I tell them. I'll print out a piece and have them sign off or offer to recreate the art...

I never thought of using the pounce bag for wedding! We use the Tilt method over here. We tilt our head to the right and l to the left until we can see the cut lines.

We use matte banner here as well. I like the finish better. Generally, we use Ultraflex superprint and never have any issues with that particular one. We have tried others and the banner tends to wrinkle I'm supposing from the heat settings. The Superprint doesn't do that. We run solvent...

https://dyetrans.com/ You might try Conde as well.

Maybe it says Pure hue? We use that on flexi when we print grey

We took a chance with a Chinese laminator brand called Audley. It's been working really well (knock on wood). Can't say I would do the same with a plotter though. I'm sorry. That probably doesn't help you. But, I have purchased heat presses (plural) from them. I've never received a bad piece of...

Similar to what GAC05 mentioned, $8.00-$9.00/sqft seems fair. I would see what vinyl I can get and price it accordingly. (2080 may cost more) For the install, you need to be competitive in your market. I charge $125/hr for on site installs. That's me and a helper. I take into consideration set...

I would use Arlon 6100 with 3270 laminate (or similar as long as it's removable) or just a plain white color change vinyl (no lam needed). See which one is more cost effective for you or what's more readily available right now. Then mark up the material according to whatever your normal mark up...

https://www.colormagicgifts.com/

https://www.dornbossign.com/ Try them. I've used them for blanks when I just need a few.

If that does not work check dampers and maintenance station. The streaking is doe to too much ink on the media. Clean the bottom of the print head and make sure your wipers are clean too. The over saturation could be doe to profile settings if you are not using the same one you are used to.

Here is a link that I found: https://wholesalecoolies.com/product/blank-magnetic-neoprene-collapsible-can-koozie/ The other company that I was talking about is https://www.bestpromotionsusa.com. I don't think they carry the magnet ones but you can look through their site. Good luck!

If you are going to be selling promotional products, then I would suggest joining one of those groups like SAGE or ESI. Your subscription gives you access to a bunch of wholesale companies of promotional junk. One company that I can think of is Koozie Group. There's another one around Dallas but...