Search results

We will tape a leader on some types of media for our LX800. Usually the time it takes to tape it on isn't worth the trouble. Have you thought about using the leader and trailer for test prints on you Mimaki?

We have a 62 Pro D that did that. The sensor had gotten out of adjustment. We had a tech come in and realign the sensor.

If you look closely, you can see some white of the door and some slight discoloration before the camera moves out. We have a FB700 and it can do some really cool things given the time to work with it.

I have used the edge guards on printing with fabric. It's hit or miss. Most of the time it depends on fabric thickness. As for the leader, I don't use it. I tape a piece of 13oz banner or end piece of decal to the fabric. Then advance enough to peel my leader off when fed through the...

We have used 3m, Oracal and Avery films to print on. The best results we had was with 3M 180c-220. It was available in 48". Yes, we have tried printing on the wrap films, but ink adhesion then becomes an issue.

I run ONYX 10 with L26500 and a HP9000s and have no problems with the 6 colour gutter stripe. I have noticed that if the print/image is wider than ONYX would like, colours from the stripe "disappear". I would try a slightly smaller image, say 2 inches (50mm) narrower than the media, and see if...

Seiko m-64

No experience with that film, but we prefer the look of solvent for our frosted film prints. Let me know how it goes for you with the UV.

Not sure about the Canadian version. It's available from Tubelite here in the states. Here's who makes it Matthews Paint Pleasant Prairie, WI 262-947-0700

We had a peeling issue with our FB700 on coro for awhile. I have switched to cleaning with mpc plastic prep 6428sp and the issue has diminished. I also started dating my coro as it came it. I found that the older coro had more issues than the newer coro.

How long did you wash the print heads? I would try to let them soak for 12 hours do a strong recovery and try again. There is a possibility that the crash could have damaged the head. The other attempt would be to apply the print head cleaning sheet overnight to the print head carriage.

We've had good luck with 3M ij8624/8580. Outdoor around 2 years with the proper install. Indoor 5+.

We had the same issue here. I shut the machine off over night. Fired it back up the next day and all was well and back to normal.

Also check above the carriage where it docks. There are 4 rubber nipples that sometimes disappear. They will expose a brass tip.

We have a L26500 and colours are pleasant. We can still hit coke red. I would check profiles and how the file is ripped.

I have seen that situation arise with a few different printers. At our shop, when we designs vector art, we usually turn off all icc profiles to read the artwork as designed. In some of your testing, when we have applied a print profile such as srgb iec or swop v2, we will get a little bit of...

Sorry to hear about your loss, Fred. It looks like you have made many 4 legged friends very happy.

sballinger, Really like the table. Nice use of the trailer wheel jacks. :thumb:

Update Replaced #1 curing module assembly and #2 & #3 resistors. The beast ran fine all weekend.

Has anybody seen this code other than me? What did you do to fix it? Already replaced a pile of parts. Looks like I'm in for a pile more. :banghead: