Search results

Hi All Ive cleaned the head at least 5 x times and also left on a damp tissue overnight etc and done at least 5 x powerful cleans but the head is still bad Does anyone know by looking at the attached Image does it need replaced? Or calibrated? or more deep cleans, or the head removed and...

Hello all Im just wondering why this is happening does anyone have any ideas? Im using a Roland VG2-300 And ive already tried lowering the cut speed right down and vacuum is up full Also sometimes when the Media gets Rolled backwards when cutting the media goes to one side, just sometimes...

I have a Roland LEC-330 And was wondering if anyone’s knows why I got the error code Service Motor Error 0080 and 0010 it stopped whilst in the middle of a print, and I was sanding a bit of furniture in my back garden, so im not sure if the dust got in there and damage it somehow? I DID Read...

Hi all Ive a LEC-330 UV printer by Roland and started to make some labels to recreate many older original ones that need replaced when i do refurbishments on older items Ive bought 2-3 Job lots of Vinyl and i printed out some nice labels and applied a vinyl wrap to make it thicker but its no...

Hi Im using Mach3 And i know that making sure a CNC is good, well one way is to make a perfect circle? After i set up Mach3 Using "Set Steps per Unit" And "Motor Tuning" 99.5 vs 99.8 mm Ive made a few Test circle cuts and measured them afterwards using my Calipers! Im just wondering to...

Hi does anyone know if the EPSON F2000 DTG Printer Main board has a fuse etc? Im repairing 2 out of 3 of these printers and have the service tool and manual also Does not also connect to the Service tool, But connects okay via garment creator! But I've tried 3 x Print Heads and no ink comes...

I Cant connect my 2 x FC2000 Printers via network or USB on Windows 10 64BIT Does anyone know how this is? Only the 2 x FC2000 Printers i can connect to my PC via USB or Network and im pretty tech savy Ive restarted the PC removed drivers, reinstalled etc etc EPSON DRIVER YOU CANNOT PRINT...

Hi Does anyone have a copy of the EPSON F2000 Service programme ? you can email me please?

Hi All I use Corel Draw and i did have a look on YouTube etc for help on this I restore a lot of old equipment mainly Industrial and Old Lamps that they just don't make any more I take pride in doing the sand blasting, Powder coating etc But when you do this the old original labels come off...

Hi ALL If anyone is familiar please let me know about the DX6 Epson 9890 printhead There is 5 x channels and the Middle two are totally blocked and the other 8 x nozzles all get liquid water through them Does anyone know how the middle 2 x could have got that blocked? And the other 8 x are...

:oops:Can anyone here help me im restoring 2 x BN20 printers and worked hard on them for 2 x weeks but had some issues with cables etc so changed the printhead many times and dampners almost had it working but had issues with Megenta so i opened up the $1200 Printhead to see why Magenta wasnt...

DX7 Roland BN20 Printhead does it take 28 x Pin Cables, 29 x Pin Cable or mixed? anyone know? I have been restoring 2 x BN20 Printers Ive mixed up the cables but i see the Carriage board takes a similar cable Im getting zero inks out my printhead now on BOTH Machines after replacing all the...

Hi Ive changed all the Head cables! Changed the Capping station Changed the Dampeners Changed the wipers Used a syringe to pull the ink up to the head Done many powerful cleans etc After all this i have the two on the left-hand side they just DONT Draw any ink and fail to print the...

Hi can anyone offer advice I have a used Roland BN20 And i assumed it needed a new pint head as no ink was coming out the printhead I have just installed another newish printhead and still no ink is reaching the head All inks are new and full It looks like its stuck between the cartridge...

Hi All :) Something is bothering me Im fixing 2 x BN20 Printers and im doing a good clean job and not started them up yet But BOTH of them dont move to Fully to the right-hand side The Small part circled in yellow sticks up on the head capping station and when the head Green line moves...

Hi I've downloaded the new firmware but I've searched Google many times, read manuals etc but I've o idea how to update the firmware from 7.2 to 7.6 does anyone know how to update the printers firmware please? I downloaded it via DG Connect but can't see an update firmware bit? Thanks

Hi does anyone know please why it says its not connected on versa works? i HAD IT CONNECTED But for some reason even after many reboots and on/off printer isnt connecting to veraworks But as you can see top image it is connected to the networks and IP Address is ok also used angry IP scanner...

BAD NEWS! And doesnt look good guys! Tried Headwash Powerful cleaning 6+ Times Medium cleaning 3 times Nozzle check, Tried TEST Print 4+ times Carriage head moving as it should! Contacted Roland they told me this Try powerful cleaning a few times And noted WHITE Inks can clog up if...

HI I thought its best i started a new post As its a new issue Does anyone have any ideas to why it wont let me how to finish the setup? in Versaworks? Doesnt anyone do a VIDEO Desktop video screen recording of how its done? Basically i know the mdeia is loaded correctly and ive move the...

Hi does anyone know how this is happened? Im in the UK And bought a used BN20 And inserted a brand-new ink tray and 4 x new eco-sol MAX Inks 440cc and one new MT 220cc metalic i haven't even started it yet but saying waste tank is 30% full? what a waste of ink/money? Adam thanks always...