Search results

the printer stops and shows error code 42:03 and paper jam code during the print. There is a big bang sound and the carriage is in the home position when the error code shows. as you can see, there is an issue with the print as well. I cleaned the encoder strip and switched another motor from...

The L570 keeps emptying the OP intermediate tank. first It reminds me to massage the ink bag to force fill. after a few force fills, the printer will empty the OP intermediate tank. then I have to replace the 750ml OP ink. also the printer keeps showing the 3L OP cartridge is out of ink after...

The L570 worked fine before Xmas. However it showed 18.10:10 error anytime when I tried to print today. power off/on doesn't solve the problem. According to the menu, it is the top extraction/condenser fan. I can activate the top fan in the curing menu and hear it running. When I removed and...

There was a M broken bag in L360 before Xmas and ink leaking from printhead rubber Nozzle area. The printer powered off while waiting for the new parts. The 2x power cables were disconnected. I replaced the new 2x ISS board and PIP and nozzle today then powered it on, but received error...

HI, The OP intermediate tank keeps emptying tank, I changed 3 new OP ink in the last 6 months. the OP intermediate tank won't pass 0.5L. when I click 'Force Refill', the printer stop the process very soon. then there is a 'X' icon on the 3L OP ink. also the amber light turns RED. when I click...

Hi, The printer shows error code 26.01:10, Ink leakage detected in Magenta supply and the ink is into the air tube. the magenta ink cartridge looks ok. That magenta PIP must fail. I have a spare L360, so I can switch some parts. I have some questions: 1 . Can the PIP be recovered or repaired...

Hi, thanks for all the help before. For this used Oce Arizona 350GT, I have replaced a motherboard and removed the brackets that secure the carriage and gantry for transport. the printer has passed the installation process. It is ready for coolant and ink, The RMO is not installed yet. Any...

The printer powered on bit nothing on the screen, the motherboard was gone, so I replaced a same model board bought from ebay. The printer can pass the installation of RFID board. Then Initialising Z axis completed. Initialising carriage, it showed motion error after I lift and lower the...

hi, I got a used Oce Arizona 350GT. it was flushed and empty before it turned off. I try to power on and test it. Would someone please give me some instruction or advice before I power on? the ink bag and coolant are not in yet. Thanks.

Summer is coming, 25-29 °C inside the warehouse. I have a lot of 79:04 errors since last month, it sounds like something wrong with the maintenance tank, something is stretching the printhead carriage during the printing, then printer stop and error reports. I have tried to replace new...

Hi, I got a 2nd hand HP Latex 360 with 3L ink, It prints well as normal, but there is no option to replace 3L ink in the front panel. how can i reinstall the manual? The level of K ink is 575ml now, will the printer refill the cartridge automatically when it is less than 500ml? Firmware...

Try to created a new material-Solvent Canvas, mode 16pass 90%ink 110degree, 40% optimizer. I try to do colour calibration, but it failed many times when it scanned the yellow colour chart. New optimizer printhead. Pass printheads alignment with self-adhere vinyl. Same meterial, same setting...

The HP Latex 360 with 3L ink supply stops working. It shows error 03:10 when it powers on. the blue and the amber light on the PSU is on. After I switch the PSU from a working L360, It shows another error 12.21:10. Print Mech: 24V to Veridian Open Circuit, then another error 01.12:10. When I...

There is the issue of dark/pure color canvas print from L570. The position of uneven print is specific, 2 -3 places, vertical along with the print. I though it was the issue of canvas itself, but this issue happened lessly on L360. I have to spray the varnish liquid to cover the issue...

I got this used L570 last October. It worked just fine for our canvas printings until recently. It starts to show bleeding on black colour, then It shows random colour line or colour block in and out of the prints, even in printheads alignments and colour calibration. What i did so far: New...