• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Need help with Rolland cut studio

    So I can't get my cut studio to run with Adobe CC illustrator from the last update. I have tried everything. Any out have it issue?
  2. Roland Service Tech

    www.kfitech.com
  3. Laminator adjustment

    Its all about the loading and set up. Also you need to make sure roller pressure is even. You need a pull gauge. like 20 40 bucks from Royal Sovereign. I seen video from fellers I think and they were webbing up a seal but I have adopted the set up and have not had a problem sense..
  4. Banner Tape Recommendation

    with some of the answers here is the exact reason why I am never on any more. To answer the question I use power tape
  5. Vinyl Express Q54 and ARMS!!!!!!

    Ya I know still added the card.
  6. Vinyl Express Q54 and ARMS!!!!!!

    The light in the room can also cause a problem. I took a business card and used it as a little cover on the head. that helped a lot. The glare would mess up the eye.
  7. Cracking Wrap

    If he was never told to wax it why would that be Manufactures fault. That would be between the shop and the end user.
  8. Avery digital shorts

    Yes I have and had a case worker for it never heard back from them. they were like wow we have never had that before I gave them roll numbers from the tube and every thing. one would think lam should be longer with the fact of webbing and re webbing from time to time.
  9. Should I charge more than $29 for this sidewalk sign?

    Why bother asking you made the videos and the web site. good luck.
  10. GX500 cuts are off

    This is all done in Versa works. the S is the start of the set M id the middle and L is the last. There are 50 in a line. As you can see the Cuts at the start and end are good.. It the ones in the middle that are off ... I load it square and true... If reset the media the cut lines are in the...
  11. gx 500 alignment tool?

    As for the cable what is to much slack?? Is this something that i can or can you over tighten it. It looks easy just move the wheel on the left.
  12. gx 500 alignment tool?

    Does any one know where to get an alignment tool for a GX500 or that might be able to help tighten up my cutter. Looks like im a little off on my cuts they are down and to the right if i recall...
  13. roland VS-420 black dots forming stripes in print,, HELP??

    What does the face of the head look like? I had a head strike once made a little dent the head. It printed fine for 5 months then I had the same problem that you are having.
  14. What would cause this banding?

    Might need to re make the file or have it re-ripped " is that a real word -ripped"????
  15. I suck and I should know this font Help me tiki

    the thing is they say I did it but I don't remember Gothic was it
  16. I suck and I should know this font Help me tiki

    I suck and I should know this font Help me tiki
  17. How conformable is window perf?

    the curves on a 5 door subi back window I think are harder. Mine help for a 2years till I took it off...
  18. Which size Laminator with 54' Printer?

    One thing I have learned is this" better to have and not need then to need and not have"...
  19. The NBM Show...should I go?

    NBM2014 is a free code
  20. the nbm philadelphia show

    Just got back from the show. Was not a sign show at all. It was all about clothing and sublimation. Still a good time. Just glad I was able to take train. ..
Top