• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Black color not drying on HP 365 Latex

    Has anyone tried to print a dark color on an HP 365 Latex printer? I have done several prints where the black is not drying and I have to wipe the black with a towel to get it even and dry. What shall I do to get it dry?
  2. WAVEY Lines on SAV pRINT LATEX L25500 HELP!!!!

    I took an old roll and sprayed it with Isopropyl Alcohol when I had the roll in the machine. I just sprayed 4 feet of the roll and then run it trough the machine and all of the waves went away. First test print went not so very well due to moisture left from the alcohol so I took a rag and...
  3. Profile for Reflective vinyl

    Hi I need a profile for 3M 780mC. It is a reflective material and I use an HP 365 Latex printer and Onyx as a rip. Does anyone know what to use?
  4. I have a trick for removing Sealitpen

    Hi on you as we say in Sweden:D I have 8 cars that will be re-wrapped and they all have a lot of Sealitpen on every window and actually everywhere:mad:. I use a paper towel and fold it several times, put tape in each corner, soak the paper in Rapid Remover, stick it to the car, and wait 1...
  5. Shift in the blue what causes that?

    Thank you so much JBurton I think you are perfectly right
  6. Shift in the blue what causes that?

    So a friend of mine has done this print that failed. It's just a simple print with white text on top of a blue box and it came out horrible. Was it the printer (HP 26500, the rip(Onyx), the person who made a mistake, or something else? I have never seen this before or later :eek:
  7. Printing another picture than it's in the software

    Hi I was printing a cut file on my HP 365 Latex, which turned out unusable. I used Illustrator, added a cutline to my text, and ran it through onyx. It looked totally fine in Illustrator and in Onyx put it printed badly. Has anybody seen this before and what have I done wrong? Please look at...
  8. Printing bright red on our HP Latex 365

    I have a question regarding printing a bright red color on our HP Latex 365. I have a problem getting it as bright as I want to. All of my prints are red mixed with whipping cream:) Any suggestion on what to do?
  9. Pantone color book?

    I was talking painting not printing so what that comes from I don't know :cool:
  10. Pantone color book?

    So it could be an existing wall that needs to be patched and that is one example
  11. Pantone color book?

    Hi I just wonder what kind of Pantone color books or what else you would use when trying to do a color match for an outdoor wall?
  12. Need Help How do I remove this adhesive

    Thanks to you all for your input
  13. Need Help How do I remove this adhesive

    I need to remove this tape from a sign that we are relocating and the tape is totally impossible to remove. I have used heat, Denatured alcohol, and Citrus Air freshener. Does anyone, have any suggestions?
  14. What kind of laminate do you use to print on.

    So now i wonder what laminte you usually use to print on if your doing backlit glaspenals with reversed print as I am doing?
  15. Question How to calculate at what dpi to print?

    But if the print has just one color which it does not say in the post then you can go with a low DPI and low passes and that will work perfectly
  16. Profil for General Formulations rough mark

    Hi I have General Formulations profil but as usual our HP says it is corrupt. Does anyone have any suggestions regarding a substitute profil?
  17. Any Lookin for a suggestion about a rip software

    Thank you for opening my eyes Pauly! We will try all different ways to print small wall graphics to determine what is happening and not.
  18. Any Lookin for a suggestion about a rip software

    Hi We have been using Onyx 12.2 with our HP Latex 365. Recently we've had weird issues messing up the results. We set a file up for printing by increasing the size 200% then made 6 tiles with 1" overlap. Then we printed on 3M 40C. The print came out with panel 5 and 6 perfect. The rest of...
Top