oce

I've just got a error code 6509 /printer/06_cnd What could this be?

Hi. I have an Oce Arizona 318 and keep getting a lamp error and it starts to beep without stopping. I have had this before and the technician had to come out and reset the error and they charge $500 every time because they need the service key. Does anyone know how to just fix the problem so it...

Hi y'all, we're looking into a 4x8 flatbed machine and we are really liking the Oce Arizona series. We're looking at either the 165GT or the 365GT models. I'm wondering if anyone can give me a quick understanding of the differences between the two machines.. i'm looking at the specs online, and...

Hey don't see a group for the Oce or I just overlooked it. We are moving things around and I know we shouldn't move the Oce Colorado 1650 without locking down the heads. Does anyone know how to do so? Pictures? Video link?

I've been having trouble printing banners on my ice Colorado 1650. Specifically 38" & 54" banners. I get my banners print side inside. Two things happen, either they read as the wrong size or they wind on their selves in the media drawer (it bunches up.) My question is how to stop this from...

Hey all, Today I did my morning maintenance of purging and vacuuming the print heads, nothing out of the ordinary. Then when I went to do the nozzle check the first time, I hit print, everything was running normally, numbers looked fine, and then suddenly the print stopped while it was laying...

I am looking into the Arizona Oce 460GT flatbed printer and wanted to know what these are going for in a used, fairly good quality condition? Does anyone know what the value of this printer is going for since it is from like 2013?

Hi all, Would really appreciate some help. Everytime I try to print a white layer I get banding until about 1/4 of the way down the print and then both heads slowly fade out as the print continues. I have flushed the white ink through and have had an engineer out several times who cannot seem...

Hello everyone, we have an OCE ARIZONA PRINTER 550 and recently we are having an issue with RFID BOARD INITIALISATION. We tried to switch internet cables and some stuff but didn't work out. If anyone can help, please reply or contact me via mail : petrit.nuredini@gmail.com

Hi guys, I have a old Arizona 250GT and I am curious if its possible, to print larger than 1.250mm. When I print on roll is the start point also on a other place. I think I had read something like this years ago that this is possible if you change something in the registry and then address the...

Looking for advice to identify what's causing this. I'm periodically getting strange vertical patterns on printouts, mostly noticeable in gradients on Alu-dibond. Problem comes and goes. More common with certain profiles but not exclusive to any one. Tried changing various Caldera RIP...

Technician came to level my printbed. We'd removed the magnetic table top and he spent the better part of a day tweaking the table and measuring with a dial indicator. I went to print the next day and had two adjacent nozzles out on black that cannot be cleared. Technician came and then found...

I am needing assistance in either finding a vendor for high voltage cable tags, or finding the raw materials to produce this. These cable tags are about 1 ft wide and about 1-2 inches tall. These have two channels that enable them to add interchangeable letters. These letters also have to be...

Greetings everyone, We decided to make the changeover from IJC256 to IJC257. The Application Bulletin here seems to indicate that we don't need to perform the "short flush," which is a process managed by the printer. Instead, my understanding is that it just needs to have a "manual...

Hey All, I'm moving our Arizona 318GL from New Hampshire to New York. The owner refuses to pay Canon to rent a crate or to shut it down and re-install it. So I'm stuck trying to figure it out. We have a rigging company doing the actual move, but my concern is more with the ink and the print...

Does anyone own a Colorado and have any real feedback to offer? We are considering purchasing one. Thanks for sharing!

Hi is it possible to rebrand (via firmware e.g.) an OCE 9160 to Valuejet 1614? Sincerely yours, Michael

Wondering if anyone has done texturing/build up with the Canon Oce and can help me with the process?

We've had an Oce Arizona 360XT for about 4 years now and it's really been nothing but problems. Lamps heating up material, white ink banding, neutral gray banding, outrageously expensive parts, expensive lamps, expensive ink heads, utterly poor service from Oce, etc. etc. etc. Oce and the local...

Hello, we have a ecosolvent printer Oce CS 9160 and we are thinking of buying a new printhead. The problem is that when I looked online for a oce CS9160 printhead, I can't find one ! When the machine starts, it says MUTOH Valuejet 1614, so I suppose the head is DX5 (at least it looks like). I...