print issues

Probably a printhead replacement needed, but I thought I would throw a post up in case someone has experience with this. Cyan has been getting bandy, but out of the blue black is shitting the bed hard. 1. See attached photos (IMG_6520 shows the problem) 2. Note all test prints are acceptable...

Please help! So I got the Orajet 3651 glossy and I'm trying to print something with the BN-20, but the print comes up with lines like this(See attached image). I believe the cause for this is the profile settings. I have searched the available profiles of Roland on their website, but the Orajet...

There is the issue of dark/pure color canvas print from L570. The position of uneven print is specific, 2 -3 places, vertical along with the print. I though it was the issue of canvas itself, but this issue happened lessly on L360. I have to spray the varnish liquid to cover the issue...

This is my first post and it was my first time to order printed banners. They are conference banners and when I got them today and unrolled them some of the edges are scuffed. They each have about a two inch trim of color around each pennant and some are worse than others. Can I use lettering...

Hello, I'm new in this fantastic forum, so I'm not sure whether I'm writing in the correct place. I've signed up to try and find a solution to a big problem I have with my Roland VS 640. I hope someone out there will be so kind as to help me. It all started with a banning in blue and red...

Well.. looks like I finally have the cyan issue on my Mutoh. I am getting inconsistent prints when printing straight cyan or blue... it almost appears blotchy and cloudy. I have done numerous head cleanings (regular, strong, low charge) to no avail. I have also tried different head heights. I...