Search results

I have a costumer that want me to print a design on 3M Fasara products (he insisted for the brand). I normally this. I'm use oracal or mactac products for trying to find if the material is compatible with my L26500 and found nothing on the web. Does anyone have tried it yet? Thanks.

Is it possible? I don't have a dibond sheet in my hand to try it. http://youtu.be/XcjjoOXHISs

I'm testing a new vinyl for murals and laminate. My test is more about adhesion, edge curling part. If I do a 12inX18in test and everything look good after let say 5 days, can I assume that a larger piece like 48inX120in will behalf the same thing at the same 5 days on the same wall? thanks...

I'm looking for a machine to make round corner on a variety of stock. It goes from paper, dibond, aluminum and coroplast. I've made a search on the forum and the accutter seems to be a solution. I would like to be able to cut 3mm and 6mm dibond and 0.63 aluminum. What woul you suggest me...

Here is my problem, I've printed 4 12inX12in squares (CMYK) and I have banding in my black square and a little bit in my magenta square. The blue and yellow are fine. All black/yellow and magenta/light magenta printhead are brand new and the cyan as less than 1000ml of use. I've tried head...

I'm looking to replace coroplast with something that do not have pvc in it. So what is the cheapest non-pvc board around 3mm or 4mm that could replace coroplast? Also, other than the new 3m 480 vinyl. Is there a basic vinyl that have no pvc in it that can be printable? Thanks Ben

I'm looking to get into dye sublimation printing. The main business is trade show display and all kind of interior design. I'm looking for something that can print miminum 8ft wide. From there, where do I go? Direct to fabric or transfer? What's the best printers in that area? Thanks for your...

What would be the best technique to install a 4ft high X 18ft long vinyl on a wall? It's a vinyl/dry erase laminate combo. I'm thinking of using my big squeegee, but I'm not sure how to align my panel to be strait. How would you do this? Thanks. Ben

When I have the time to scan the web, I often to to the globalgarage web site just by curiosity. I saw this inca spider printer for a ridiculous price. I was wondering how much would be the printheads to replace and bring everything to life...

Ok, maybe it's a dump question, but I can't figure it out. I do alot of printing for music bands and I often been ask if I can print white ink on black flag. I've checked some of them and the fabric is black, both sides, and the graphics is printed in white only. the sizes are 8ftX10ft or...

Hi folks! I've bought a summa dc4sx for very cheep from a friend. I currently have an HP L26500 and a summa cutter. My main business is related with interior designing (mainly wall covering types). Now I'm struggling between keep it or sell it. I know there is some possibility's I would be able...

I don't know what to do. Whenever the number of pass (6,8,12) or material (I've tried banner, poster, vinyl), I have horizontal banding in my print (about 0.25in wide). We see it more in dark colors. I've done multiple print head cleaning, printhead alignment, lubricate the carriage, update...

I've already done installation of perforated vinyl in the early or end of winter (0° Celsius or 32° Fahrenheit). But a customer ask me to install perforated vinyl on 6 of his store in February 1st. The temperature can go down to -20° Celsius or -4 Fahrenheit). My first question is, do I will...

I would like to have some suggestions of what kind of glue I could use to stick magnetized sheet to drywall. I'm making my own version of the waltakers mag-riteII . I'm quoting for over 10k square feet to install in a large office. I want something reliable for this application. Thanks for...

I hope someone will be able to help me out. I'm looking for trims and trays to make dry erase board. I'm looking something similar to the ones sell by walltalkers. Does anybody have a source for this kind of products other than walltalkers? Here are the links of the products I'm looking for...

Is there any fluorescent vinyl that can be printed with a HP L26500? If yes, what brand would you suggest? Thanks. Ben

I have 2 blades made by ''clean cut blade''. They are 45° for Roland cutter. Their parts number is ''ROLD-45''. Both are still sealed in their box. I'm selling them because I bought a Summa cutter. Their original price is 17.35$/each and I'm open to any offers. I pay the regular shipping...

Does anyone have the service manuals for the HP L26500? Thanks.

Hi, I've ordered a roll of fabritac made by ultraflex. When I print, there is vertical lines in the print. My suppliers changed the roll and it does the same thing. Is it me or the material itself? I have a HP L26500. Thanks.

I Asked to some dealers and check on the Web to know what is the difference between summa 's D series and S series. The only answers I've got is it have more bells and whistles. I've saw the specs on the website, but it do not reflect real life using/example. Does anyone could answer this...