Search results

5GB of RAM is an odd number. That usually means something is up with the hardware.

Surecolors use dual channel dampers like the ones in a lot of DX7 based printers like the Mutoh ValueJet 1624 and the Roland VS540. Epson is notorious for putting small parts together into a larger assembly and only selling that as a replacement which is the case with the Surecolors. So it does...

The latching position and capping position are actually two different things. For the capping position you just want the center of the flange to be about 3mm to the right of the top of the ramp where it plateaus. As long as the cap is making full contact with the head in the area, you're good...

It all depends on the plotting software but a lot of them cut based on when the element was created in the order of all elements, or it cuts by layer etc. Mimaki's have a, "Sort" function that sorts it in the most efficient way but most plotting software has the same function and might call it...

Oh yeah Mimaki's bottle system is way better! Hopefully they switch to that here in the US!

It prints great and is a solid machine but my customers so far absolutely hate the ink system. Instead of simply inserting a cartridge, you have to take the old one out, remove the empty bag, weight the new bag and input that into the printer, install the new bag into the cartridge, then install...

That's usually a sign of failing dampers.

They don't make parts for the FC7000 anymore so you would need to source them from used machines. Not the end of the world as these machines last a very long time but something to keep in mind.

With these machines you can almost never rule anything out but in my experience, when the power board goes out on a ValueJet it usually just doesn't turn on, or it turns on for a few seconds and then turns off. I'm thinking the main board will do the trick. The power board connects to the main...

The answer to 1 is simply add the jobs into the production manager individually, select all the jobs you want to print at the same time, then just right click and select, "Nest." Flexi will nest them for you but you can go in and rearrange them if you want.

I think it's definitely a main board issue so trying the other board could do the trick. The fact that it's trying to do something and freezing tells me that the CPU or related parts are failing. It might just be bad memory too. If the other board has a memory board in it, try swapping it into...

If you have an older version of the 1204 that has the removable memory board, remove the board, air dust the terminal, and re-install. I've seen a dirty memory board terminal cause strange issues like this. I also would recommend just unplugging the machine and letting it discharge for about...

Do you have any effects going on this file? Maybe that one part of the design got caught up in the effect and was rasterized along with it unintentionally?

If you haven't changed the sensor I would start there. The HDC board might just be fried as well.

It would be in the regular menu usually abbreviated, "ENV MATCH." It's very possible that your machine is one of the ones that does it automatically behind the scenes but it won't hurt to look in the menu just in case.

I don't know if this model has an environmental match but if it does, I would run that. It should sync the linear and motor encoders.

Some aftermarket wipers are too stiff for that machine and it just gets stuck. The sound is the motor spinning out.

Do you use a different IP other than the default? Mutoh's have a tendency to revert to the default randomly for some reason so if you use a different one that could be the issue. Have you tried connecting to another device?

Why PM? Let the world know!

I actually have to sign an NDA not to give out certain manuals. Seems to be the way the world is going unfortunately. The primer is much more harsh than the regular inks. On the JFX200 if you use primer you have to get a special metal sub tank instead of the plastic ones so that might be the...