• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Need Help Epson DX7 Heads and their various incarnations

    Check your part number @ www.digiprintsupplies.com

  3. Wich Printhead Ricoh 6Gen or Kyocera KJ4A

    I would go for the Ricoh because it's easier to get almost any where. Already using Gen 5 they are robust and fast. Never used Kyocera but I'm sure that they are also excellent.

  4. Which RIP software do you use ?

    Wasatch is more user friendly than Onyx and Caldera. Only thing that might bother you is if you need to make some color adjustments as it wont let you do that easily.

  5. Which RIP software do you use ?

    Wasatch

  6. HP L260 Error Code

    Attached document will help solving your problem. It's for Z6100 but I used it on L260 and worked fine.

  7. Need Help Tear drop / feather flags

    https://allprint.co.uk/product-category/soft-signage-print-fabrics-and-accessories/non-pvc-fabric-media/

  8. Test print files

    Caldera test print file

  9. Need Help Mutoh Cleaning cycle too often

    Mutoh system doesn't allow turning off cleaning cycles. What I do since 2011 is setting it to maximum, turn the printer off after work till next day. In the morning I run a nozzle check and every thing is fine. Just remeber to keep it on during long week ends and clean wiper, capping station...
  10.

    Need Help Printing problems

    This is called ink starvation, can be as "Nebo" mentioned earlier air bubbles, clogged damper or bad print head. Inspect the ink lines first for any leak, run initial charge for ink and see the results if every thing comes out fine then your done, else replace dampers first and head if...
  11.

    Weird Ruler being printed

    Clean the encoder strip

  12. Is any Tech from Africa over here?

    Egypt overhere

  13. which is cheaper to run? UCJV300 or HP Latex 3xx

    Short answer, Mimaki
  14.

    Need Help Help me.

    Are the O rings installed properly ?
  15.

    Need Help Help me.

    Remove, recheck every thing then re install.

  16. Need Help [Need Supplier] Digital Printing and SAV Installation in Doha, Qatar

    We're in Egypt and would be pleased to help www.nagadapro.com

  17. Need Help need advice/anyone know about A3 UV Flatbed printer

    Keep away of Chinese UV, it's a total waste of money. I did this mistake before with 180cm direct to textile printer, it was half the price of a Mimaki, I had to build lots of mechanical parts that was malfunctioning and still couldn't get reliable performance, all other friends I know who...

  18. Need Help Printing Red

    The one and only true solution is to have a custom profile made

  19. Suggestions 1324 help

    Check the cables again, they are tricky

  20. Backlight Printer

    More than 70% of our work is backlit film, we use 3 stone age old HP Z6100, 2 Epson 9700 & one R2R U.V printer. Best quality, speed & cost is the HP Z6100 followed by Epson then U.V. Tried lots of backlit film on Mutoh 1624 using Eco Solvent and UMS OEM ink, nothing can match the vibrancy and...
  21.

    Mutoh Print Head issues...All nozzles Present

    This isn't a cleaning issue, it's the media.
Top