Search results

Just so you know...this post is five years old. I have the driver, and can email it to you if needed. It will work up to xp.....I'm using it now on a windows 7 machine in xp mode.

I have the GRC 61 driver and can email it to you. Just need an email address.

I had been looking too, and found this one. Haven't used them yet, so not sure how well it works. Bottom right side of this page > > > http://solventcartridges.com/

I had heard before the 8518 had a 3 year instead of 5 year rating because it was too new. Maybe now they are more sure about the product?

Where I used to work we had a poster printing press using inks. After printing, there was a dust you could sprinkle on the ink, that puffed it up a bit. Might check with an older print shop.

When I bring a print/cut file into Versaworks as a pdf file, it will sometimes print little segments of the magenta cut line as part of the graphic. The cut line is there only as a cut line, it shows the marching ants just like it should. Not sure why this happens. I like the way pdf's print...

I'm using 7 pro too, and have to run my older version of flexi in xp mode. Works fine. I think what you're looking for is the windows 7 driver for your machine. Here's Rolands chart for models, and it lists the cj500 > > >...

not sure on your model, but before my sp300 would work with 7, I had to order a cd from Roland. Versaworks couldn't update to the needed version for some reason. Once the cd came, the driver installed and off we went.

My daughter opened a hair salon a few years ago....brown, pink, and lime green are her colors.

Hey...your right!! I knew I saw them somewhere, and have been searching the net. Right there on page 82. Thanks!!

I'm quoting a job looking for an exterior notice board with locking cover. It could have a chalkboard, dry erase board, or cork board inside. They want to be able to change it themselves, but don't want the letter track system. I could be lit or they can shine a light on it. (not backlit)...

...and be careful with the black rubber bungees. I used some a couple years ago on a billboard banner that didn't last but about two months, before cracking and breaking. They said made in China on them. I found some USA made bungees and they have held up fine since.

+1 .... just a drop or two of soap in homemade fluid. Some add some alcohol to speed up the dry time. When I started out, I made some of my own fluid. I have seen vinyl fail due to what appeared to be bad adhesion on a job or two, so to eliminate the problem I just buy app. fluid. It's made for...

Hey..what about regular rubber grommets from the auto parts ?

I've used a local print shop do similar stuff. They had a room full of oversize sheet stock to choose from. For artwork, I took them a black a white file on disc. Also a good way to print larger restaurant menus, etc...

WOW....glad there wasn't any lightening that night!! ....October of 59, I was one month old.

Since finding felt squeeges a few yeas ago, I hardly ever use a plastic one. Sometimes they scratch a little, but it usually goes away. If you drop it, make sure you clean all the grit off before using.

I've been using this one since 2002. It's not in the greatest shape, but it has a couple more years in it. Just flip it around and over once in a while. For me, cutting pvc on it does the most damage. Where I used to work, in the 90's we had a couple of these 4' x 8' Mega Mats They have the...

I also use the Rapid Tac products. Rapid Remover for adhesive removal, tar, etc... Rapid Prep for the initial clean, wax, etc... Rapid Tac for final wipe down, and wet applications. I clean till it squeaks. The manufacturer recommends cheap white paper towels, as some towels can have chemicals...

I used to work for a beer company and we had our own truck wash. We had a heat fired pressure washer, a and a bucket of soapy water and brushes to scrub the whole truck, which takes a while. It wasn't just wash it once a week...it got washed every time it was dirty. Could be 3 or 4 times a week...