roland

Hey guys I need a bit of help trying to get my printer to print without a rip or a software that's cheap I have a roland sj-640 ex and I'm using Onyx21 Ripcenter I had the license key sent from onyx America And they didn't take into account that I have an sj-640 So now that I spent $1800 on...

My Roland RF-640 printer stopped in the middle of a printing run. I turned the machine off and now the printer will not turn back on. Any Help is Greatly appreciated.

Hey everyone! Just got a new Roland VG2 54" and it's AMAzing. I'm using Arlon 4500 GLX for stickers, but am looking for something thicker. A couple of years ago Arlon made something thicker, grey on the back, w/air release, but then they discontinued it. Does anyone know what that thicker...

We are getting scan motor error on our LEF 300 and carriage gets stuck on the left. Printer has only 100 hours on it. Anyone else have this issue?

We have had problems with the encoder strip and had to have replaced. 2 months later...Now throwing a scan motor error. The machine is also saying the cover is open (it’s not) and we can’t print. Has anyone experienced anything similar? We are being told that the cover open has been know to...

We have an old but very great Roland SolJet XC-540. There's a spot on the printer about about 12" in. Whenever the carriage passes over this spot, the blade toggles up and down a couple times. It isn't dragging over the print or messing up the ink while printing, but it goes up and down, so...

Ok I'm sick of my colors not popping the way they should. Does anyone have some tips or links for building or getting great profiles? I need some "for dummies" type step by step type stuff for this. I print all day, but don't know much at all about level adjustments or quality settings, or how...

Hi guys I am new to the sign making world and to print and cut machines. Getting on well so far learning myself as I go. So noticed after doing quite a few print, laminate and cut stickers that there is always a part of the sheet where the knife hasn't cut through properly, you notice when...

I am running a roland versacam sp300V, I want to upgrade computers and software, I have been running flexi 7.6 on a windows 7, 32 bit computer. but new computer will not allow the security key to install?? but the software installs fine. installed corel, prints nice but adding inside/outside...

I just upgraded my PC to Windows 10 and my CorelDraw to version 2019 64-bit. I ran through all of the instructions for creating the CutStudio plugin icon but when I click the icon, nothing happens. I pasted the .gms and .bmp files into the GMS folder in Program Files and in the GMS folder in...

Hello, we are printing on Roland and cutting on a Summa. When cutting nested jobs the order it cuts is so random it causes issues when perf / flex cutting. In general the flex cut feature cuts random. We would prefer it cut in the same order as our Rolands. Is there a setting that forces cuts to...

Hi, due too little space I need/want Print and Cut in one unit.. for sign and stickers print.. Im looking at Roland TrueVis VG2 or Mimaki JVC 150 series...(or is there any other brand out there?) Does someone have pros / cons on these -Thank you -

We just retired our Roland printer but still have a Roland plotter. Other two printers we have use Onyx Thrive RIP. Can't get this to work for our Roland plotter. Briefly had it almost working except double cut everything. Anyone else have this issue? Techs seemed stumped. Hate to have to...

We are using a Roland 54 inch. When we print from Versaworks blacks are great. We use 60/60/40/100. When we print the same job out of Flexi PM using several profiles we just can't get rich blacks. Any suggests or settings that could help. There are so many settings and just not enough literature...

Where do you get your jigs?

I bought this Roland SP300V and I fired it up just to see if it would print anything, and after basic issues I got it to run a very fuzzy System report, so I Purchased 2 new printheads, ranked, and new dampers, caps, wipers, and pads, I replaced all the parts like I have done before on a VP540 I...

Good morning everyone, Just recently, I've developed a problem with my Versacamm SP 300i. Any san serif or fonts with straight edges cut sloppily when small in size on my printer. I do not seem to have the same problem when the design is about 10" or larger. The machine used to cut small...

Good Morning, Do you use a different profile for each type of media you print on? Do you have any across-the-board profile types you recommend for optimal printing? Could different profiles be the answer to color specific banding? Have you found that generic (or random) profiles deliver...

Hi All, Anyone knows if you have to use 2 Felt Wipers and 2 wipers on Roland XR-640 ? I've bought used XR-640, currently having 1 felt wiper and 1 wiper set up and 2 empty slots for additional felt wiper and wiper. Is it supposed to be this way or I should be running it on 2 felts wipers + 2...

Good afternoon everyone. Just starting this morning, I've been having issues printing on my XC-540 Soljet printer. It was working fine before the weekend, but after running a job through, the print comes out misaligned and blurry. After trying a few calibration fixes, I cleaned the encoding...