eyekandy graphics
New Member
Hey every one!, just like to say hello and that I'm excited to get to know you.
So here, you can get to know me.
I know how to use forums very well, running and moderating a couple.
I race, build and design RC boats and have a couple that run around 100MPH mark, all electric.
I am 21 years old. Work for a marina in Muskoka as a tech there, previously worked on a close friends pig farm for nearly 5 years, and worked for LEGO Canada as a event guy.
Being in the marine industry winter is down time! hence where the sign making comes in.
I bought my first cutter ( 32 inch) in 2007 when i was 17 and used it up until two months ago to cut as much as i could! It helped me buy my two beautiful Cadillacs, and my boat.
However as of last month i had purchased a SP 540 V printer.
I knew I enjoyed sign making alot and the graphic end of things, so I took it to the next step with this machine. I still have yet to come up with adequate pricing and margins to give my self enough profit, however my overhead is low as I am running in the basement.
Here is some history on my work.
4 FULL vehicle wraps, one which is my own( shown in picture)
7 window front full graphic displays for local stores
many helmet, bike and snowboard graphic packages.
6 snowmobile wraps( all custom not purchased online... which I only found out about last week!!)
And MANY other stickers and graphics for my RC boats, model cars etc.
So that's where i am right now, unemployed for the winter. However learning how to be self employed while teaching my self at the same time
Thanks!
Regards
Taylor Shaw
So here, you can get to know me.
I know how to use forums very well, running and moderating a couple.
I race, build and design RC boats and have a couple that run around 100MPH mark, all electric.
I am 21 years old. Work for a marina in Muskoka as a tech there, previously worked on a close friends pig farm for nearly 5 years, and worked for LEGO Canada as a event guy.
Being in the marine industry winter is down time! hence where the sign making comes in.
I bought my first cutter ( 32 inch) in 2007 when i was 17 and used it up until two months ago to cut as much as i could! It helped me buy my two beautiful Cadillacs, and my boat.
However as of last month i had purchased a SP 540 V printer.
I knew I enjoyed sign making alot and the graphic end of things, so I took it to the next step with this machine. I still have yet to come up with adequate pricing and margins to give my self enough profit, however my overhead is low as I am running in the basement.
Here is some history on my work.
4 FULL vehicle wraps, one which is my own( shown in picture)
7 window front full graphic displays for local stores
many helmet, bike and snowboard graphic packages.
6 snowmobile wraps( all custom not purchased online... which I only found out about last week!!)
And MANY other stickers and graphics for my RC boats, model cars etc.
So that's where i am right now, unemployed for the winter. However learning how to be self employed while teaching my self at the same time
Thanks!
Regards
Taylor Shaw