Search results

Yeah they definitely need to do in better light conditions than where she was, lots of grain in that one. I'd say they also need to make sure they are taking them at the biggest resolution they can on their phone if that's the only option. Some phones you can select different resolutions...

Never mind. Got it freed up again. Took about 15mins for it to clear itself up after deleting the files. Should have a "delete post" feature.

I was processing and file and changed the sheet size as it was ripping and now it's stuck in a "Not Responding" state. I've deleted the files from the Work folder, restarted and it's still hung up and the file is still showing but I cannot do anything. Now work has come to a halt. This is not...

Same goes for what ikarasu said. Once I got it going and found the right parameters 99% of the time it works great. Every now and again I have a hiccup, but it's nice when you get it to work and don't have to tend to the machine constantly and can just let it run.

Sounds like you have your work too close to the outer pinch rollers. I usually leave about 1" on either side of the sheet for the outermost rollers.

You might want to check on any firmware updates for the cutter and also any updates that have been released for Onyx. It should read it and fail on finding the data at least, doesn't even seem like it's detecting the mark at all.

I assume your putting the start just under the black box before you start it. It should find it and start to look for the sever for the related cut files after the starts the scan. Are you using some kind of special material?

Scan Mode 1 on my cutter. What happens when you try to read a barcode? Are you using a roll barcode or sheet barcode?

You shouldn't have any problems with version 22. Something is off. I'm running v19 and it's working for me.

I've got a customer looking for stickers holographic material. I can't print white so I'm limited in what I can do with that material. Looking for someone that can handle 1K - 10K run of die cut stickers on this material that I can get wholesale. Thanks

It for their business, so I'd prefer something appropriate for that, otherwise I'd just print it on calendared and cut it. I check out signs though! Thanks!

I've never done a decal. I've got a 2 color piece, white and green, and about 14" x 14" in size. Customer wants it to go on the back window of their car. Is this something I should print or would it be easier to have it done in colored vinyl? I've never done just straight cut vinyl without...

How small are you going? You're bound to get some slight variation, just the smaller the border the easier it is to see the variation in it. On small stuff I do 1.5" I don't do less than a 1/16" border, on larger stuff I try and get customers to go with 1/8" if possible but still no less than...

Thanks! I'll have to check on it but I think 50/50 will should be ok. I see commercial vans with it on them quite often, but I'll dig in to look for specifics on this law. I found this is in the window tint law, I'm assuming it goes for any kind of application on a rear window, including perf...

I had a customer ask about doing a graphic for their back window. I know I have to used window perf for this or else their rear view mirror will be useless and probably get them a ticket. I've never printed, or installed any window perf or anything on glass before. What is the recommended...

I deal with this so much as most of my business is with individuals or people that don't understand printing IS NOT magic. I get screenshots all the time, if I can scale it to a useable resolution for the piece, I'll use it instead of trying to explain vector artwork because 9 times out of 10...

I deal with this so often with people. Send me images they have made for a label or sticker without knowing the size of the piece they want before they have their artwork done and then it has to be scaled different or cropped. Just like lots of people think printing is magic and you can just...

No. They're always like that and never had any problems. I did try moving a pinch roller slightly out, about 1/8", and I tried to cut that column again and it cut the full circle. I didn't get any messages like it was Off-Scale or anything like that. Just seems odd and if there is a way to...

I was cutting a few sheets today and it's not using the barcode to read the sheet I set it over the start positon then send the cut data via onyx cut server. However I noticed on every sheet the far column would only do a half cut on every sticker in that column. I don't know why, the cut files...

What are you laminating this with? Thickness? And are you just doing kiss cuts or are you cutting through material and backer on these?