Search results

No, I dont think so, we get ours from: http://www.fusesunlimited.com/

You may want to try this: http://www.mutoh.com/kb/entry/68/ I put a file in the 1304 Test folder - grantgreen This is a glossy ABV profile. This will take your RIP out of the equation.

Lithium will dry up and cake, Graphite is electrically conductive. It looks like a moly http://service.mutoh.com/#/MSDS%20Sheets/ dow corning EM30L grease.pdf Short term you could use a sewing machine oil or 3 in 1 oil. Use very lightly.

I would still check in uni. And try a different wave form.

Good luck, but be careful!

http://signs101.com/forums/showthread.php?t=45626&page=3 I have a post there with a fuse holder and part# for the fuses and source. Bayshorecreations has a photo walk through as well.

My concern is if you dont know how to test a fuse, you probably should not be attempting to remove and replace it. You can easily damage the main board. Make sure the machine is powered off and unplugged, hit the power button a couple of times...

http://www.signs101.com/forums/showthread.php?t=68530&highlight=head+fuse+jr http://www.signs101.com/forums/search.php?searchid=1170879 Depends on your skill level at soldering surface mount components on pcb's.

A number of possibilities. Head alignments - does it change when you print uni? Encoder/timing fence or timing disc - clean the timing fence and disc with denatured alcohol. Check that the sensors are not touching the fence or encoder. Some type of harmonics between the RIP software...

head fuse?

The recommendations from 3M were 42/30/50.

andy, Every product we release is tested and beta tested. We have been collecting the anecdotal evidence from the field and trying to reproduce it. As I have stated, we have been unable to reproduce in house, a number of problems being reported. And as far as leading edge or bleeding...

g1sammons, Thank you for your kindness. Yes, Mutoh realizes that there has been a problem with the new carts. It was not an immediate realization, and the difficulty has been sorting out which reported problems are due to the new carts. IF we knew that ink starvation was related to the...

Like Stealth Ryder alluded to, these machines were shipped with an SEH box. Mutoh techs know that, but they dont always know how to connect these to a USB device (of which there are many) or on a variety of OS's that the machine wasnt designed for. Which makes forums like this so valuable.

Yes, I am interested in 'fixing the budget', and NO there have been no 'orders from my superiors' And what are your expectations of free advice from a forum? I try and provide the best advice and information that I can. I believe that you all have been in contact with Mutoh Customer...

I dont find those errors in the manual. I think the first thing I would do is check all connections.

I think the Presets in 8.1 include the initial ink restrictions and final ink limits where the media is only the color correction ICC?

I believe that you should be using a Present and not a Media

You dont need a bounding box because there is nothing to align, as there is when you print then cut. Load your media and send file. The SC Pro will measure the media.

Depends entirely on the RIP if cut only is supported. Ask ColorGATE if cut only is supported, my guess is that is should be.