Search results

You need to seal the wall with a good all round block out We use Zinsser bulls eye 123 primer sealer

Hi we run the Roland VG 640 (CMYKLcLmLk+W) Can defiantly recommend it The white is a really good option if you produce a lot of window films But be warned if you don’t think you will use the white ink go cmyk cmyk as you need to run the white head at least once a week to keep the head...

When was the last time you replaced the two outside pinch rollers? They are supposed to be concaved If yours are flat you need to replace them Also turn the heaters off while cutting And slow the feed rate down most people have the feed rate to fast

Worth a try Perform 2x powerful head cleans Followed by x2 medium lastly x2 standard Sometimes realigns the nozzles Failing that it’s a new head

0010 is the scan motor deviation error see images from service notes

Hi I don’t know why the true Vis gets so much bad press We been running the VG64 for two years now without any problems If i had to gripe about something it would be the take up spool The right hand bar is too close to the media We ended up taking the par off and cutting about 1inch Of the...

Sound like you have 2 problems Dropping out is probably a cracked head cap ( the nipple the damper sits on Easy replaced. 2nd problem Take the ribbon out of the head If any of the gold tabs are damaged, Replace the print ribbon from the head to the print board If the ribbon is damp you have...

Black is made up from CMYK values and will use all the colours to generate black But your cyan head is misaligned you need to do a bidirectional test and enter the best values Failing that try printing in unidirectionalas a quick fix

I agree Best save the file as a PDF not EPS The new versa works is having a lot of problems with cutting EPS files

1st off you need to calibrate the bidirectional settings Change to the most visual strait lines Try doing a powerful clean followed by a normal clean This sometimes realigns the nozzles Have you tried printing in unidirectional ? If that doesn’t work you will need a new head :(

hi corel x6 cant inport any AI file from Adobe CC you will need to upgrade Corel to x7 or x8 if you are saving the ai file from illustrator back seve it to version 8 AI

do you know what grade of UV ink you are using? in you have the correct formula for your application, no lamination required but spray on laminates are best for UV ink as acrylic adhesive will not stay stuck for long. Try offering anti graffiti liquid laminate , that way you get to charge an...

hi we run two arizonas and have gone from green to clear without any probs

HI You will find it's UV printed, with 3-6 overprints to make the lettering raised

AMC are still going, now run by a German company uk rep Alan Henderson Irridian Industrial Electronics Ltd 2b Nelson Park West Cramlington United Kingdom NE23 1WG Tel: +44(0)1915970636 Fax: +44(0)1914067523 Mob: +44 (0)7795577557 www.irridianindustrial.co.uk

hi you have got ink or cleanig flued on the cabel and in the print head get a new ribon cabel and dry out the print head befor conecting the cabel

test print is fine to get the report you need to get into service menu From memory Number the 4 arrow s as follows 4 3 2 1 Turn the printer off Then press buttons in this order 1 2 3 4 Then pres and hold down in order 2 1 3 and hit the power button

Tel you client his running gear is now obsolete and sell him low voltage LEDS Save him money in the long run

hi In sign lab go to moduelas and re install all the fonts from all of your drives onto your c drive file/instal /fonts check all boxes

dont get boged down with whats on the screen use the colour replacement tools from your rip. start by printing the rips colour cards in spot replacement section and assign the new colour to your file in the rip both files will then print the same