Search results

CD 2019: Try Alt+F+F (_F_ile-> New _F_rom Template)

Is there any other reply/input?

Calibrate using Roland Service Notes for XC-540 (number at bottom: 70031-14), section 4-10 Crop-Cut Adjustment. This is pretty much spot on but when I use the print/cut with crop marks on an actual project the cut is more than 2mm skewed. Appreciate your reply.

Using print and cut later as opposed to print and cut (now). Cut contour is off by 2+ mm but checks out fine when calibrating it. I just don't get it. Help!!

Many thanks. Changed scan motor but still have some noise. Apparently it is something else being noisy.

Cereal makers found they could get people to throw away perfectly good cereal by putting an "expiration date" on it...

I'm satisfied with ATLAS SCREEN SUPPLY for 220 mo Eco-Sol ink. Reasonable pricing and GREAT service/response. Read up on their site for direct replacement (no flushing required). Their site appears primarily oriented toward screen printing so you need to search for Roland Supplies...

You've got something completely out of whack. Did you disconnect all of the ribbon cables when you changed one print head (dangerous)? -perhaps they are mixed up. Why are there no letters, A-B-C for the three print head groups? I have an (old) XC-540 (but they should all be pretty much the...

Were you able to complete this project based on the photos I sent? Looks like my reply here has been removed. Eric

Without seeing a test print, I'd guess it's a print head issue with clogged nozzles.

Friends, my scan motor seems even noisier and I have bought a replacement. It seems easy enough to replace but I wonder what must be done/adjusted/etc. after replacement beyond resetting scan motor hours?

I have an XC-540 and thought I understood the question, looking for wiring order, but then it looks like you answer the question...

I'm using a dedicated machine hard-wired to my XC-540 and haven't updated it in over a year. It's not broken and I don't need to fix it. Hope to retire and shut down before computer fails.

Put a line on your quote that says, "Valid for 30 days, only."

As with any business, you don't do people a favor by undercharging and going out of business and not being there the next time they need you. You do them a favor by giving them a good quality product at a fair price (where you make money).

I have used JET BEST (magenta only, not cyan) and don't use my printer frequently. I write the date on cartridges when I install them and the single JET BEST (440 ml) still in my machine is from January 2018! (It is near empty.) I make it a point to do a test print every other day that I don't...

Certainly the customer wishes to identify himself on the product. I print thousands of decals and put my contact information on the FRONT (vinyl side). It's all one step during printing the decals. I also add the REORDER number and a note: Shrinkage is normal. This note for shrinkage on...

FrankW, Do you recall how to get the time on the scan motor on XC-540? Edit: Disregard getting the time on the motor(s) = I found that. I'm amazed at how LITTLE time shows for the amount I've used the machine. Is there some unusual way that it is calculated?

You didn't say you replaced the magenta ink cartridge with a new one. Are you sure it has sufficient quantity?

Did you resolve this issue? If not, try cleaning the encoder strip. Cost is zero (so long as you don't break anything).