xc540

Trying to print a 122x50in banner on my XC540, something I've done several times, but for some reason, the last two days, it starts and stops almost immediately, the carriage goes back, and the screen just says now processing, and VersaWorks says not connected. I changed the ip address several...

Does anyone have a part number for the bearing blocks on my XC540? Found a couple things but wanna make sure before i order them.

It seems to coming from the cutter potion of the cut carrier, If I separate the cutting potion from the printing potion and manually move the cutter across the length of the printer I can feel a clunking noise and feel it in the head. I will attach a video. It doesnt do it constantly. but i keep...

Looking for any help or suggestions you may have? At my wits end! A few days ago my XC540 was just finishing a job and it was going to park. It made a clunk nose and beeped. The code 0106. After googling it, it said to do a Limit initialization. So I did this by pressing and holding left, up...

Hello everyone my question is simple... as i have 2 old SP540 (not working), recently i could repair my XC540 with the old SP540 bearing blocks... so i was wondering if there is any other compatible parts between the two Does anyone know the list of common parts? Thank you all

bought an XC540 that needed work, replaced a bunch of parts however I'm still hearing air coming from the cyan head. replaced all 12 dampers and all 6 cap tops, also replaced the manifold for the cyan head and there's still an air noise when pulling with a syringe from the cap top. placed the...

Hello everyone. I have Roland XC-540, it was working perfectly, but suddenly after a really short amount of time there appears a grinding noise behind the cutter assembly as far as i can hear it. When the head is printing, after less then a minute there appears a horrible grinding noise, and if...

Hi! I have 2 heads that i think might need replacing, can anyone point me in the right direction? might be something else then new heads i need? I have changed the dampers and cap tops on all 6 heads. Any ideas? it is head 1 and 6 that have trouble, the rest print fine. ( i know yellow is...

Hi evryon, this is Ahmed From Bahrian. Can anyone help with my Xj740 i would like to run the printer with 2 or 4 printheads insted of 6 Is there an option to do that Thanx

We acquired a small competitor recently and they have a Roland Soljet PROIII XC540 Print & Cut. We have been printing with it and everything seems to work fine. The previous owner had it serviced several times a year and he was as meticulous as anyone I have seen about that sort of thing. The...

I'm wondering if someone could give me some insight on an issue. (See Photo) Every now and then I get this strange line on my print. Where the line occurs the image seems to skip or off-set itself. It's almost as if it resembles a processing glitch. Anyone ever see this before? Could it be a...

Hi folks, I had an engineer replace the cyan head as it was banding. In the process he showed me the cable connecting to the head one of the end pins was bent. He said it wont be an issue though and continued the process. The head was in and firing perfect for about 10metres. Then Group A...

Hello. I have a Problem with my XC540. Its about 12 years old now and I have printed millions of SQFT I am sure... not sure how much, but the other day I noticed when I was doing a cleaning That the carriage is sagging or hanging forward. Is there a Screw or something I am not seeing on the back...

Concerning Roland SolJet XC-540 Lately we have had problems with the magenta and light cyan ink levels reporting zero in VersaWorks. It's not affecting the prints, but we have had issues with both of those heads (replaced dampers, captops and cleaned heads as per tech guys advice). Anyone else...

We usually design in Corel and/or Photoshop and bring it into Versaworks as a PDF. We're running a Roland XP-540 Soljet III. However, I have recently added the new Vinylmaster XPT to my office station and the print station. I have been learning VinylMaster XPT from a design standpoint and am...

All of a sudden, my xc540 keeps giving me the "pinchroller error, invalid right position". My service rep thinks that it is the cable that runs to the tool carriage. So we replaced it and it did not fix the problem.(and yes, we double checked that everything was connected back to the circuit...

I have a Roland XC-540 for sale in terrific condition. Has been fully serviced by Supplies Unlimited in Wakefield, MA and can be picked up or delivered if you're located in the New England area or we can crate and ship the unit. I am anal about all of our machines, so this unit has been kept...

hello all. i have a soljet xc 540 love the printer hate roland corp. as u all know they just want you to replace boards so they make big buck and us little guys cant afford that. so i see alot on here about the f1 fuse blow and the cy/mg heads go down. i have the tech manual and checked...

Hi, does anybody know how I can set up Versaworks to pause the cut process after printing. I'm trying to figure out how I can avoid having to manually pause the machine (XC540) after print so that the machine doesn't want to cut right away causing the rollers to go over the fresh ink and ruining...

I am using colour-science.com test image for visual printer and monitor check. Few weeks ago I got satisfactory results. Today I repeated the same thing and I get totally different result. Colors are shifted, grays are reddish. Now details. Image dowloaded from...