• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

versaworks

  1. Roland XC-540 not printing crop marks

    Good afternoon, I have searched everywhere for help with this, to no avail, so I'm coming to the Pros! I'm trying to Print, Laminate and Cut. I have enabled Print Crop Marks on the dialog in VersaWorks, made sure it's Print only and sent. Went it goes through the printer, it won't print the...
  2. Need Help Profiling Media In Versaworks With I1pro2

    Hi guys I've been reading previous threads, googling etc etc but i'm still no further forward. I need to profile some media, i've been using the generic profiles but i'm getting really bad results with a couple of vinyls, I always intended to make my own profiles but I need to get started...
  3. Help Please! Mottling On Wrap Film

    Hi guys! I am pulling my hair out here, I have a vehicle wrap to do on Tuesday and this is happening on my printing!! I am using genuine eco sol max inks, versaworks 5, Avery MPI 1005 SC EZ and using the matching Avery profile on 1440 dpi. Printing on SP 540i. I have tried several settings...
  4. Versaworks Job Properties Sp540v Vs Vp540

    I just acquired a used VP540, prints good, very low hours; really pleased with it. In setting up Versaworks so that everything is consistent between it and my current SP540v, I noticed that VW handles the printing of job properties on the sheet differently for the VP. Let's say I'm running a...
  5. Sp300v/versaworks Photos Print Green.

    Printer seems to be functioning as normal. Prints a media chart without any noticeable issue. I'm trying to print some photos... and I can't seem to get the color right. Everything has a fair bit of green. I have a boat cowling to wrap in a camo pattern, that is mostly brown. A lighter shade...
  6. Roland Sp540i Color Calibration

    Hello, I need help with color calibration of my printer Roland SP540i and Versaworks. I have a problem with colors, everything goes to magenta and think is time to solve it better than manualy reduce it in versaworks settings. I probably need to create custom profile for our media and ink. I was...
  7. Transparency Issue

    I recently purchased a Roland SP-300V and I am having issues with transparency. I am using Illustrator. I am printing a graphic which contains some transparent vector logos. I save the file as a PDF. When I open the file in Versaworks the colors seem to be a bit off, maybe brighter/neon tone. I...
  8. Signlab 9.1 for versaworks

    Hi everyone, and thank you for allowing me to be a part of the community! ok my question, is there a way to set a job up for perf cut? its a pain to send job to illustrator to add the perf cut line so im wondering if there is a way to do it right in signlab? i use signlab 9.1 print & cut, and...
  9. Versaworks not seeing CutContour

    I recently moved shops and changed some computers around. I installed Versaworks today on two different machines for two different printers. Machine 1 works fine. Machine 2 will not see my cutlines, even though machine 1 sees them from the exact same exported file. I triple checked all the...
  10. Versaworks problem/ question

    I was watching a tutorial on setting up a input folder. Under queue a properties/ job management tab you can enter a folder location for a drop spot for files. When you open Versaworks it goes to this folder and loads all the files in the folder under the queue a job list on the left side of...
  11. Is there a way to set more crop marks in Roland Versaworks?

    If I design a 5 inch x 5 inch decal that requires printing, laminate and cutting, send it to Versaworks and set my repeats to 200 with crop marks, so that I can laminate the sheet, reload and cut, odds are really good my contour cut will drift towards the end of cutting process and I will lose a...
  12. Help me understand Flexi PM PerfCut Please

    I've done a search here but don't believe I have found my answer. Transitioning away from VersaWorks. Workflow = Design in Illustrator (MAC) / Open PDF within Flexi Production Manger (PC Win10Pro) / Print/Lam/Cut on Rolands XC540 & XR640 I set my Perf Cut swatch to PerfCutContour like I...
  13. Versaworks showing trash cans

    I just installed versaworks to a new computer and I put all my old jobs from old computer into the Job-A and Job-B Most of them are now showing trash cans in front of the file in versaworks. Any idea how to fix this?
  14. Roland GX300 not recognized by Versaworks????

    I had to re-install Versaworks into Windows 10 and my XR-640 installed fine into Versaworks. I have been fighting for days now trying anything and everything I can think of to get the GX to be recognized and every time I try to add the GX300 it says: Device not found or status not acquired...
  15. VersaWorks queque question

    Do you leave old jobs in your queue or deleate them when done? The reason I ask is I just printed some decals and used crop marks so I could laminate them after they dried. I had change the tile spacing between the decals to separate the a bit more. I had closed out VersaWorks and when I went...
  16. Moving VersaWorks to a new computer input

    Did a little search here but asking as well. Looking for any input or things to look out for on: • Switching from VersaWorks to VersaWorks Dual. • Switching out to new computer with Windblows 10 / 12gig mem / 128Gig SSD drive and has seperate 1T HD as well. • Also run Flexi and will switch that...
  17. Versaworks - How to stop media from advancing after print

    Hello, after I send a job to Versaworks v 5.2.2 it advances about 6-8 inches of media. I send a lot of jobs throughout the day to the printer and I have to go to the printer to send the media back so I don't waste the blank unprinted area. Is there a way to adjust the amount the media advances...
  18. Roland VP 540 AND VERSAWORKS loosing IP connection and stop printing not connected

    My Roland printer VP-540 stops printing in the middle of a job, initially it was only EPS print&cut jobs, now a few days later its also PDF jobs that stops. printheads just docks, display reads "now processing" and Versaworks says "not connected" I have read a lot on the internet, also here on...
  19. Adding cutter to Versaworks

    Hi guys, I am having issues with getting a cut only machine to work in Versaworks. I've got the cutter hooked up and working with cut studio. But in Versaworks, I cannot add any job to the queue, and I get a message like: "Only files displayed can be dragged and dropped" We are working on a...
  20. VW profiles for CMYKcmk?

    Hey everyone, I'm running a VS-540i with a CMYKcmk ink setup. I'm trying to find print profiles for VW for my printer, but Roland's profile center has next to nothing for this ink setup. The last shop I worked at ran just a CMYK setup, so this is new territory for me. So here's my 2-part...
Top