Search results

Looks great!! I think you did good!!

I left Charlotte, NC 3 years ago. I'm currently in Birmingham, AL. There is a big difference in the way the shops and clients respond. Charlotte was more about quality. Birmingham is more about price. Before the start of the Covid, I knew some shops in the Atlanta area that were 2-3 weeks...

I never had good luck laminating with a RollsRoller. It didn't have enough pressure. The Seal 62 Pro D we had, always did a better job when laminating.

We have printed a few rolls of wall paper lately. We are using a HP L560. I wrote a custom profile, and when we print, we have a minimum of the colour bar on the side edges. After the printing has completed, we roll it out on the table and hand trim with our long straight edge. We usually...

I have a PMS chart that I created and also custom built files, images and vector, that were compared side by side after both machines were profiled.

Have you tried a different roll on media? If there was an issue running the length of the web, if could be the media.

I have printed with HP Latex, UV and solvent machines. I have also used other brands, Mimaki, Seiko, OCE, Canon, Epson. The HP has a very high temperature to evaporate the water from the print. It requires 2 220V outlets. The solvent or eco-solvent machines I have operated only require 1...

Have you checked the inline filters above the thermistor? They are between the thermistor and the manifold.

3m 40c and Avery 2105 is what we use here.

Thank y'all for the insight and experience. I will post results and some finished pics if we receive the job.

I need advise. We have a client that would like stand offs for indoor signage in a restaurant. I have a 50% track record when drilling through tile, yes, i crack it. I would like recommendations on what y'all are currently using that would better my chances. No, I do not know what type of...

I didn't save the font, have the outlines. Can anybody help with this one? Logo from 20 years ago.

click the gear beside "Placement" and turn off the Gutter Size and the Offsets and rerip the file. We have a 560 and sometime have that issue.

We wipe the surfaces with alcohol before sticking and use a high bond tape. I know Oracal and 3M both have them available.

I just think they were letting you know that they weren't from around here...:)

The DigiDri is a great product. We had 2 back in the day. We were running the HP9000s. We didn't have any out-gas issues after we started using them.

The wall size would be 8'h x 23'w. I was thinking about a butt seam on the panels, but the print film and laminate would draw up over time. I haven't located a cast dry erase laminate.

A customer has asked us to print a wall mural and have a dry erase / anti graffiti finish. I have been using 3m 40c-20r & Vandal Guard for years on smaller projects, but nothing with seams. I'm looking for somebody that has had a similar request for a wall wrap and what worked for them.

If you group jobs together, then go to placement, you can adjust the settings there. I would give step by step, but am currently in an all day print job.