error

Hello. I use a Mimaki CJV150-130 in my work. In my work we use this machine to do some signs, only for the company purpose. So we buy new INK cartridges, in this case we buy SS21 ink, but we previously use BS4 ink, and now when we try to put the machine running appears an error in the boot "INK...

can any tell me what this error message is about. Error invalid or unsupported id. on line 2658

I have a Graphtec FC8600 and I am using Flexi 12. When I send a cut it gives the message OFF SCALE. Plotter just stops there. I have tried: Rebooting both computer and plotter (both several times) Different files, as simple as just plotting ABC. Deleting and reinstalling driver in Flexi manager...

I received a Mutoh VJ1204 large format printer for free, knowing that it was 'broken'. Previous owners didn't want to pay to have it fixed so I figured since I had some technical knowledge, I'd be able to work on it in my spare time. The error I get is "E068: CR Encoder" Knowing that this had...

When I try to do a cut on the Valuejet 1624X Printer, It just scores the vinyl, and does not make the cut. Then comes up with a cutting error. I need to release and reset the vinyl to clear the error code. Does anyone have any idea of what I need to do to repair this. Just noticed, sorry...

Hi! I have a RSC-1401HW Laminator and when I power it up, it just has a constant beep. I checked and neither of the emergency stops are depressed. The one on the front would just spin when trying to disengage it, so I pulled the cover and tightened it back up. They both seem to work fine now. I...

Hy guy ! I 'm looking for help just got a SUMMA DC4 for 6 month now and can't get a good printing on white vinyl. I hope i'll find here some SUMMA thermal printer users (if there is any left) to help me on this printer. There are two major problems that i'm facing every use: A light banding...

Hy everyone, We've just got a used Latex HP 360 printer in the workshop but the printer display a Yellow Broken bag error 26.06.10. We are new with these printers and not having any experience with theses. Any help on this will be welcomed:) François

I am having some trouble with my 1938tx, original the print head 2 wasn't printing, I swapped the print heads from head 1 and 2, and the same channel printed so I knew that the printhead was still good, since now print head 2 was printing 100%. So than I changed out the mother board, and...

When it rains... I have recently began receiving a CPFO error on my Sabre. It was intermittent and would eventually go away. Now that I have several jobs I need to router, it has decided to stay. Any advice?

My Xuli X6 with Epson Dx5 print head is showing "FTA Epson the print head error occurs" anyone have an idea of what the problem is?

hello my friends i know this is an old thread, but i have the same problem with my vj 1204, check the image, i buy a new print head whit a flat cables new and one kit of maintenance, i try print but E074 err Current Cr and the carriage stop in the middle of the printer, and later of reset the...

I have issue on two computers running Gerber Omega Composer. Whenever I try to print a layout to the desktop printer, Composer crashes with an error. Has anyone ever encountered a BEX error? Problem signature: Problem Event Name: BEX Application Name: GspComposer.exe Application...

Hi guys I have strange error on my Mutoh 1624V. After turning it on it will immediately display error Media End and there is no chance to print on media. I tried covering and removing media sensor and even in service mode I can detect change in sensor behavior. When sensor it's not covered in...

first for me, printing just fine for a couple of years, aside from media/ink errors, but suddenly today my HP26500 latex printer wants to SLAM into the far-side of the printer during its power-up/preparingsystem/scan processes. ...and then throws me a media jam error, even with no media in the...

I have been using a Roland Versacamm VS-640 for the past 5 years. I run sheets of decals that are 54 in. wide x 40 in. long. I use crop marks. I remove the sheets after they print, laminate them, then reload them into the Versacamm to cut. Everything has been fine for years, until recently...

Hi all, Tried for a while to set up my Summa D750 with WinPlot and CorelDraw X6. Everithing went fine until I tried to export the vector from Corel into WinPlot for cutting. I use a serial cable with a USB adapter for my laptop which has no serial port. When trying to send to cut I get the...

Hi guys, This is my first time using Signs101 and I am kinda in a huge jam. I have a Mutoh VJ 628 printer, and today 2 error messages came up that I have no idea how to fix. In my Valuejet Status Monitor it says: "No Media" "S/C Card Error No: 56" I have a new roll of media in the printer...

Hello friends I have a small inconvenience, stolen my pc where I had the drivers and software of my printer Dazzle Jet 3208km luckily I have a Maintop 5.3 Original with key, the problem is that now the new pc asks me for the printer control or a Driver Maintop Usb System Control and I do not...

Anyone know of a way to make the cut server more accurate when cutting objects. For instance i have 10 ovals across the 54 wide material. there are 10 rows of this. It will cut from left to right and complete all 10 of the ovals but it will then skate all the way back across the material to...